Jump to content

H8SPVMT

Members
  • Posts

    223
  • Joined

  • Last visited

  • Days Won

    4

Posts posted by H8SPVMT

  1.  DANG!

    I forgot to check the date of the original post..........

    Jason D.

     I live in Summerville, SC and hear the HOPKINS repeater often but can only hit it on "GOOD" days. I have heard several folks chatting on both repeaters Hopkins and the older Bowman 600 / Orangeburg area repeater(s).  Kingstree is a good one too but I seldom hear anyone on it.

    Never thought too much to buy into the CSRAGMRS 725 as it doesn't reach me either.

    Being a mobile unit (Midland MXT400) and just far enough from all the repeaters that I have to travel prohibit any conversations I might hear.  I have become friends with the owner of Bowman 600 over the last three/four years and check in with him during my travels up and down I-26 and similar rds.  I HAVE gotten permission to use the aforementioned repeaters but seldom call on them just cuz I don't have anything but chit-chat and of course I am usually driving... and it takes priority.

    I usually leave my unit on SCAN just incase a call comes down the pike, it helps if I have the time to answer (If I have the necessary CTCSS, etc....  Unit is mounted in the JEEP for trips only.

     

     

      

     

      

  2. On 4/19/2024 at 6:20 PM, WRVP339 said:

     If I transmit on channel X with CTCSS turned on , How will I know if I someone else is or is not talking on that channel that is not using a CTCSS tone ?  

    It's been my experience that you might hear them, or in the case they are using another CTCSS setting you'll see the signal bar on your display indicate a signal reception from their radio. Pay attention to the, "listen first" as well.  

  3. A "No Reply" to me is a NO.  when owner have replied to me with an email or notice I I print it out and file it with my GMRS information for use at later date as I might need it during my travels. 

    I really don't fret about a No Reply.  It is solely their equipment and I regard their action to be OK too.

     

  4. I'm thinking that if you're breaking squelch you're close enough to have reception.  I wonder if the operator/owner has the station on a split frequency from input to output.  Just a wild haired guess!  Make sure to remove any CTCSS/DPL on the receive channel.

  5. On 3/14/2024 at 7:01 AM, H8SPVMT said:

    Yes this would be a great idea for learning to use practical navigational skills minus the GPSr available today. My scout education prepared me for life back in the late 1960s as well.

    As a matter of fact, I still carry my first compass given to me for map reading to this day in my Jeep.

      

    I forgot to mention that this simple education lead me to learning open water navigation and GPSr use later in life.

  6. Yes this would be a great idea for learning to use practical navigational skills minus the GPSr available today. My scout education prepared me for life back in the late 1960s as well.

    As a matter of fact, I still carry my first compass given to me for map reading to this day in my Jeep.

      

  7. C'mon, Roger Beeps are like naked people lurking in the shadows as you travel down the highway.  You never get to see a pretty one and only the ugly, un-interesting parts are exposed!

    And they cause the same people to scream at a volume and tone that no one listening wants to endure for even a minute.

  8. This reminds me of the citizen beginning to pass a Tractor Trailer traveling below the speed limit on the interstate. With his blinker on citizen begins to get out into the left lane and pass the truck at the legal speed limit.  Truck driver now speeds up to the speed limit too, preventing the the fellow to pass without speeding. 

    Now all those that like to drive faster than the speed limit are blocked and blowing their horns.  Whos at fault; everyone is traveling the speed limit?  

    I say the truck driver, as he needs to slow down and allow the citizen to pass and clear the left lane.

    There are always people with what looks like good intentions.   But they seem to disregard the laws after getting use to never getting caught or, having their actions reviewed by the officials.... 

    Are the Sad Hams getting frustrated because they think GMRS users are in their way?

     

  9. "G-M-R-S"

    General "MOBILE RADIO" Service

    Seems pretty simple to me this would relate more to your current location (City/State should be broad enough) than, your home base location for simplex and repeater conversations. As a strictly mobile setup I give my current location when asked. This way it's understood I am traveling thru at the moment.  I think it would be confusing if someone were to look my call sign and I am 3-500 miles from that location.

    Privacy behind the microphone?  Never has been an issue for me.

  10. If I understand this correctly the issue is that you have several repeaters that you use and many are on the same frequency/channel but different PLL (CTCSS/DPL) codes.

    I carry with me a list of the repeaters I plan to encounter on my trips with their individual information. Best I can come up with using the Midland radios.  But it doesn't help much as many of these repeaters are near busy cities and I am too busy driving at that those times as well.

     

  11. 8 hours ago, jchrist said:

    I can't seem to get on a repeater. I've tried a few times to get on a local repeater (Crete IL) but i don't get a response to my requests. How can I join a net if I can't connect to a repeater?

    Dealing with my first repeater contact.

    One issue I had was understanding that just because I could hear the repeater, I thought it could hear me.  Turned out my signal wasn't strong enough to reach the repeater on my mobile. This turned out fine once I found an area clear of trees and obstructions that blocked my signal as the repeater was (25-35) many miles away.

    Then I learned too that the signal on the repeater would actually change (drop out) in response to my opening the repeater after I attempted to call and let people know I was monitoring the repeater.  This told me I was actually hitting the repeater but no one was there listening to their radios at that time. 

    I don't know if your set-up is mobile or, stationery.  Hope this helps. 

  12. On 12/8/2023 at 6:25 AM, gortex2 said:

    Been Jeeping for 40+ years. First vehicle was a CJ. Currently we wheel our 2009 JK 2 Door. Its our beat on off road jeep. Also light wheeling of our 2020JT.

    Do alot of Jeep Jamborees, so Uwharrie for 5 years now along with Greenbrier and others. Do alot of Forest Service roads with the JT.

    I use what ever channel others are on but scan when alone. 

    We did Greenbrier on it's inaugural event, mud festival and wet leaves all uphill it seemed, but fun. Crawled the creek it seemed for half a day!  Retired Navy, had heard all about the place and wanted to see it for myself.  NICE DIGS!🥰

    Still doing the Williamsburg JJAMUSA now for 18 years... well will be 19 next year.

  13. 7 hours ago, Sshannon said:

    I’m the same way. I don’t off-road just to be off-roading, although it looks fun. 
    I off-road to get from one place to another and I intentionally choose the easiest route for my 4-Runner. 🚘 

    I'm officially retired now.  We (wife & I) get out often as life allows but we try to stay away from the crazy stuff as we travel alone anymore. Getting too old for winching and shushing around in the mud.  Learned a good lesson on that in a OK bean field while traveling on the Trans American Trail, alone.

  14. 2 hours ago, StogieVol said:

    Same, you have a 2017 Rubicon also?! Nice! I love mine. Any pics on here? 

    See if I can post one here of my first 2001 TJ and 2017 Ruby. My JK in the front before the 2.5" lift and Bushwacker fenders and a Warn 9.5 winch. Sold the TJ to my friend behind us.  Pic from a VA4WDA event near Lovington, VA.

                         V4WDAAnnual20150918_Staging.thumb.jpg.0fbe4fb7468cb26e182b6fe55162d19f.jpg

  15. 2 hours ago, StogieVol said:

    I use to do light dirt/gravel roads in my Jeep. Then I climbed a pretty rutted out hill and was hooked. Now I want to go hit trails and see what the Jeep can do without being dumb and trying to hurt it. I like to be easy and be smart about trailing. I only want to fix something if I have to. I do not get wild and just break things for fun. 

    I don't trailer mine and have to remember, "I drove it here and will have to drive it home" and even my 2017 Rubicon has parts now are no longer in production!

  16. Ch. 16 and surf the the others.

    Spent a lot of time in Uwharrie NF years ago.  Palmetto Jeep Club even owned a trail (SAWMILL) for winter maintenance before it was re-routed.  Seen lots of changes pass thru that park.

    Did some (worked) Camp Jeeps too in VA.  Mostly we wheel with VA4WDA and Williamsburg, TN, JJAM any more.

    Completed the Trans American Trail and others....

  17. On 10/10/2023 at 11:14 PM, WRYG604 said:

    Summerville, SC also. I have been licensed for about 2 months now WRYG604. Also, I am a licensed HAM (KB4ERT) for 33 years. Still trying to learn about GMRS, I have a BAOFENG GM-15 PRO, I'm still having a learning curve about programming it.

    WRYG604-Bert

    When I first started with this I had my unit turned on all the time I ran the Jeep.  Not so much anymore.  Many Jeepers were talking about using CH. 16 (4x4) but I never hardly hear anything there either.  I guess this i really a business and family form of communications.  Scanning doesn't bring up much either in S'ville.

  18. On 9/17/2023 at 2:11 PM, WRYS438 said:

    I know what I was doing wrong now.  Duddddd    Oh well.  Getting old is a  bitch.

     

    Thanks much Mr. Dude

    Might I suggest you print out a copy of the (NEW) Operations Manual and instructions for the CTCSS & DCS code and operation/steps for a file to keep in the car for future use.  I did this and it helped me alot -down the road-!

    Best wishes on the getting old and the new radio!

     

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.