Mikeebob Posted February 27, 2021 Report Share Posted February 27, 2021 While scanning I would like to continue scanning after the RX transmission ends (so many seconds). Right now it just stops scanning and won't resume scanning. Any thoughts...? Thanks,Mikeebob Quote Link to comment Share on other sites More sharing options...
0 Mikeebob Posted February 27, 2021 Author Report Share Posted February 27, 2021 Well... Looks like I found my own answer! Overlooked it. Uggggg Menu 10 TO---Continues afer 5 secCO---Continues after 3 sec (signal lost)SE---Scan stops... Press PPTor funcytion key to store it CaptCoz 1 Quote Link to comment Share on other sites More sharing options...
0 tpp517 Posted February 28, 2021 Report Share Posted February 28, 2021 FYI, TO works better for me, CO seemed to resume scanning even though a signal was present. Quote Link to comment Share on other sites More sharing options...
0 scorpion1200 Posted February 28, 2021 Report Share Posted February 28, 2021 I love this radio it out performs my MXT400.Wouxun KG-100G is a winner!!!I like that you can scan the CTCSS and DCS only when someone transmitting.The only downside is on VFO mode i can only input frequency range 400.000-479.995MHz.I thought it would go up to 499.999MHz.The MXT400 range is 400-489.995MHz.I need the 483.000MHz range. Quote Link to comment Share on other sites More sharing options...
0 serrasalmus Posted March 29, 2021 Report Share Posted March 29, 2021 i love the way the scan groups are setup. i have my a side scanning the standard gmrs channels 1-22 and some 2m and 440 repeaters along with the iss and my local FD, then side b side is scanning only the 5 local gmrs repeaters i use. ive also set up scan groups for when we go wheeling, ive got it set to scan only the gmrs channels to listen to see if anyone needs help. and with the primary channel switch u can always monitor a set channel....so far been a darn tootin good radio Quote Link to comment Share on other sites More sharing options...
0 Sbsyncro Posted April 12, 2021 Report Share Posted April 12, 2021 —-[Moved to another thread]—- SkylinesSuck 1 Quote Link to comment Share on other sites More sharing options...
Question
Mikeebob
While scanning I would like to continue scanning after the RX transmission ends (so many seconds).
Right now it just stops scanning and won't resume scanning.
Any thoughts...?
Thanks,
Mikeebob
Link to comment
Share on other sites
5 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.