DarrylLicht Posted September 16, 2023 Report Share Posted September 16, 2023 DigiKey and cables are on order so I can use Chirp to program my new UV5Rs soon. I'm a technical person and not afraid to fiddle. I am reading and devouring info on GMRS, want to learn the RIGHT way to operate so I can teach the wife and grandkids proper radio use. Also, can I change my username to display my call sign? Seems most of you use your call signs and that is a way ppl can reach out via GMRS. I just want to test my radios and learn proper radio etiquette. Anyone receiving??? Quote Link to comment Share on other sites More sharing options...
WRYS709 Posted September 16, 2023 Report Share Posted September 16, 2023 DigiKey? Quote Link to comment Share on other sites More sharing options...
OffRoaderX Posted September 16, 2023 Report Share Posted September 16, 2023 Put your radio on Repeater Ch17, add Transmit Tone DPL/DCS D023, and me, or any of a dozen or so people monitoring that repeater via the internet will talk to you.. WRXB215, fremont and WRUU653 3 Quote Link to comment Share on other sites More sharing options...
WRUU653 Posted September 16, 2023 Report Share Posted September 16, 2023 42 minutes ago, DarrylLicht said: Also, can I change my username to display my call sign? You will need to contact Rich aka @rdunajewski to do this but it is possible as others have done this before. Quote Link to comment Share on other sites More sharing options...
WRYS709 Posted September 16, 2023 Report Share Posted September 16, 2023 1 hour ago, OffRoaderX said: Put your radio on Repeater Ch17, add Transmit Tone DPL/DCS D023, and me, or any of a dozen or so people monitoring that repeater via the internet will talk to you.. Hard to discern between the UV-5G, UV-5X and the newest UV-5R(GMRS), but this chart from the UV-5G manual seems to indicate that he might want Channel 25 instead of Channel 17? Quote Link to comment Share on other sites More sharing options...
OffRoaderX Posted September 16, 2023 Report Share Posted September 16, 2023 Impossible to know without knowing which flavor UV-5R he has.. it might be labeled "repeater 17", it might be labeled "Channel 25", it might not be there at all and he will have to program the frequency (462.600) AND the split himself, from scratch. WRYS709 1 Quote Link to comment Share on other sites More sharing options...
DarrylLicht Posted September 16, 2023 Author Report Share Posted September 16, 2023 2 hours ago, WRYS709 said: DigiKey? Sorry connection between my cranium and fingers must have a short circuit!!! I meant DigiRig Quote Link to comment Share on other sites More sharing options...
DarrylLicht Posted September 16, 2023 Author Report Share Posted September 16, 2023 1 hour ago, OffRoaderX said: Impossible to know without knowing which flavor UV-5R he has.. it might be labeled "repeater 17", it might be labeled "Channel 25", it might not be there at all and he will have to program the frequency (462.600) AND the split himself, from scratch. First question is how do I know which flavor? I take it all UV5Rs are not equal? All it says on it is Baofeng UV5R??? On my radio, yes that freq of 462.6 is REPTR3 #25 Quote Link to comment Share on other sites More sharing options...
DarrylLicht Posted September 16, 2023 Author Report Share Posted September 16, 2023 Actually it seems that on my radio, that freq of 462.6 is GMRS 17 ??? My requests for a radio check are going unanswered... Hmmmm Quote Link to comment Share on other sites More sharing options...
WRYS709 Posted September 16, 2023 Report Share Posted September 16, 2023 16 minutes ago, DarrylLicht said: Actually it seems that on my radio, that freq of 462.6 is GMRS 17 ??? When you push the transmit button does the frequency change to 46SEVEN.600 (467.600)? That is the correct channel If not, then try Channel 25 DigiRig? Quote Link to comment Share on other sites More sharing options...
DarrylLicht Posted September 16, 2023 Author Report Share Posted September 16, 2023 I can select either ch17 or 25 and when I push TX (PTT) the display doenst show me the freq. I also switched to Freq mode and still no responses? Digirig Interface Kit for programming with Chirp Quote Link to comment Share on other sites More sharing options...
WRYS709 Posted September 16, 2023 Report Share Posted September 16, 2023 36 minutes ago, DarrylLicht said: I can select either ch17 or 25 and when I push TX (PTT) the display doenst show me the freq. I also switched to Freq mode and still no responses? Digirig Interface Kit for programming with Chirp Forget Freq mode for now Try Channel 25 outside with a clear view north to Rancho Cucamonga All you need is a good quality USB to K-1 programming cable (preferably FTDI chip). You don’t need a digital modem; those are for ham radios for different purposes Did you program in the Digital DCS 023 tone for transmit? Quote Link to comment Share on other sites More sharing options...
DarrylLicht Posted September 16, 2023 Author Report Share Posted September 16, 2023 11 minutes ago, WRYS709 said: Did you program in the Digital DCS 023 tone for transmit? Trying to decipher/translate the CHINGLISH in the users manual to do that. Quote Link to comment Share on other sites More sharing options...
WRYS709 Posted September 16, 2023 Report Share Posted September 16, 2023 4 minutes ago, DarrylLicht said: Trying to decipher/translate the CHINGLISH in the users manual to do that. Try this on Channel 25: Push MENU; Push UP ARROW until you see: T-DCS, then push MENU again, then push UP ARROW again until you see D023N, then Push Menu again then push EXIT WRUU653 1 Quote Link to comment Share on other sites More sharing options...
WRYS709 Posted September 16, 2023 Report Share Posted September 16, 2023 Then Push MENU again and push UP ARROW until you see MDF-1, then Push MENU, then push the UP ARROW key until you see FREQ, then push MENU again then push EXIT. Now you should see the frequency instead of the Name and see if it goes up to 467.600 when you push the Transmit button Quote Link to comment Share on other sites More sharing options...
DarrylLicht Posted September 16, 2023 Author Report Share Posted September 16, 2023 13 minutes ago, WRYS709 said: Try this on Channel 25: Push MENU; Push UP ARROW until you see: T-DCS, then push MENU again, then push UP ARROW again until you see D023N, then Push Menu again then push EXIT DONE! Thanks - In monitor mode and not hearing any traffic or responses to my rad check requests. Perhaps Riverside is too far from Rancho for a hand held to reach? Quote Link to comment Share on other sites More sharing options...
WRYS709 Posted September 16, 2023 Report Share Posted September 16, 2023 Is it showing the change of frequency when you transmit? 18 minutes ago, WRYS709 said: Then Push MENU again and push UP ARROW until you see MDF-1, then Push MENU, then push the UP ARROW key until you see FREQ, then push MENU again then push EXIT. Now you should see the frequency instead of the Name and see if it goes up to 467.600 when you push the Transmit button What is Monitor mode? Quote Link to comment Share on other sites More sharing options...
WRYS709 Posted September 16, 2023 Report Share Posted September 16, 2023 I think you have the older UV-5R Go to Frequency/VFO Mode and Enter 462.600 Push Menu, Push UP ARROW to T-DCS, Push Menu, Up Arrow to T-DCS, Push Menu, Push UP ARROW to D023N, Push MENU Push EXIT Push Menu, Push UP ARROW to SFT-D, Push Menu, Push Up Arrow to +, Push Menu, Push Exit Push MENU, Push UP ARROW to OFFSET, Push MENU, Enter 005.000, Push MENU, Push Exit Stay in Frequency/VFO Mode and now try transmitting Quote Link to comment Share on other sites More sharing options...
WRYS709 Posted September 16, 2023 Report Share Posted September 16, 2023 19 minutes ago, DarrylLicht said: Perhaps Riverside is too far from Rancho for a hand held to reach? Perhaps, once we are sure you are transmitting on 467.600 and receiving on 462.600 with the digital tone of D023N, then you can go for a ... ROAD TRIP!!! Quote Link to comment Share on other sites More sharing options...
DarrylLicht Posted September 16, 2023 Author Report Share Posted September 16, 2023 12 minutes ago, WRYS709 said: Is it showing the change of frequency when you transmit? What is Monitor mode? No. Pressing TX it still shows that channel not freq. Monitor mode is to listen to that channel/freq. The UV5R has a MON button - long press gets you into monitor mode, short press turns on flashlight The only channel I can hear traffic on is GMRS 16 and it is all in Spanish? I thought 16 was for off road 4x4 users? Quote Link to comment Share on other sites More sharing options...
WRYS709 Posted September 16, 2023 Report Share Posted September 16, 2023 read my last two posts... Quote Link to comment Share on other sites More sharing options...
DarrylLicht Posted September 16, 2023 Author Report Share Posted September 16, 2023 11 minutes ago, WRYS709 said: I think you have the older UV-5R Go to Frequency/VFO Mode and Enter 462.600 Push Menu, Push UP ARROW to T-DCS, Push Menu, Up Arrow to T-DCS, Push Menu, Push UP ARROW to D023N, Push MENU Push EXIT Push Menu, Push UP ARROW to SFT-D, Push Menu, Push Up Arrow to +, Push Menu, Push Exit Push MENU, Push UP ARROW to OFFSET, Push MENU, Enter 005.000, Push MENU, Push Exit Stay in Frequency/VFO Mode and now try transmitting DONE! Still not hearing any chatter or replies. GMRS 16 seems to be the only active channel in range of my loc Quote Link to comment Share on other sites More sharing options...
WRYS709 Posted September 16, 2023 Report Share Posted September 16, 2023 Are you able to see the frequency of 467.600 when you transmit and 462.600 when you receive? MON only turns off squelch to try to hear weak signals; you don't need it now. Quote Link to comment Share on other sites More sharing options...
DarrylLicht Posted September 16, 2023 Author Report Share Posted September 16, 2023 5 minutes ago, WRYS709 said: Are you able to see the frequency of 467.600 when you transmit and 462.600 when you receive? MON only turns off squelch to try to hear weak signals; you don't need it now. FIRST OFF THANKS TO YOU ALL FOR THE HELP!!! I TRULY APPRECIATE IT! The display doesnt change when I hit TX/PTT button, Still shows freq as 462.600 Quote Link to comment Share on other sites More sharing options...
WRYS709 Posted September 16, 2023 Report Share Posted September 16, 2023 Daily nap time soon... Did you do these two steps in Freq/VFO mode? Push Menu, Push UP ARROW to SFT-D, Push Menu, Push Up Arrow to +, Push Menu, Push Exit Push MENU, Push UP ARROW to OFFSET, Push MENU, Enter 005.000, Push MENU, Push Exit Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.