Wouxun 1000g plus will not transmit, only receive from my handheld 935G plus

[txrancher47]

I bought a Wouxun 1000g plus recently and it will not transmit on any of the lower (1-7) channels.  I have a hand held Wouxun 935G plus and I can receive its transmissions using the 1000g but cannot reply.  The mike is plugged into the proper slot.  There is a red light appears when I key down using the 1000g, but no modulation.  The handheld does not appear to be receiving any signals from my radio.

Does anyone have any suggestions?  I am a newby so please forgive me if I ask questions.

Thanks,

[OffRoaderX]

Are you sure it is channels 1-7 not working? By design and per FCCs rules, the KG-1000G will not transmit on channels 8-14.  Does yours transmit on 8-14? Does it transmit on channels 15-22?

[txrancher47]

I enjoy your videos...your video inspired me to by from "buy 2 way radios".  I bought the Wouxun 1000g plus and the Wouxun 935 plus.

 

 

I bought a Wouxun 935 Plus to check my Wouxun 1000g Plus base station.  The base station receives the signal from the handheld and I can hear the person transmitting but the base station will not talk to the handheld.  I "reset" the base station as per the instructions and still cannot transmit...the red light comes on but I can't transmit to the handheld.

My radio will not transmit on 8-14. 

I don't understand how to input the tones...yes I watch your video and read the handbook.  I am a newby and know nothing about radios.

Thank you for responding!

Sam

[WRUU653]

9 hours ago, txrancher47 said:

My radio will not transmit on 8-14

If you are stating this as the problem then as @OffRoaderX has said it won’t. Mobile radios are not allowed to transmit on 8-14 per the FCC. Also when testing between radios make sure you put some distance between them. If they are too close they can cause desensing and won’t work. 

[WRWE456]

10 hours ago, txrancher47 said:

My radio will not transmit on 8-14.

On page 34 of the hand book It says "(Channels 8-14 are only authorized for very low output power and are listen only.)"

Channels 1-7 should work.

[bshort]

I had a brand new KG1000 that transmitted 2mhz off right out of the box.  If you have a meter, confirm it's actually transmitting on frequency.  

[OffRoaderX]

1 hour ago, WRWE456 said:

On page 34 of the hand book

Yah, that's the problem.. Right there...

[WRYZ926]

You mean we are suppose to read the manuals?????  

Everyone is correct that mobile radios only go down to 5 watts at the lowest power settings which is way over the 0.5 watts limit for channels 8 - 14.

I know one mobile radio that will transmit on channels 8-14 even though it should not since it is over the 0.5 watt limit on low.

 

[back4more70]

For years, my father designed and oversaw development of the top jet fighter IN THE WORLD, and to this day he refuses to read a manual for anything.  I just sent him a Blu-Ray player, and he asked me to hook it up next time I visit.  IT'S ONE HDMI CABLE.  And his planes are still winning dogfights fifty years later. I give up.

[txrancher47]

22 hours ago, txrancher47 said:

I enjoy your videos...your video inspired me to by from "buy 2 way radios".  I bought the Wouxun 1000g plus and the Wouxun 935 plus.

 

 

I bought a Wouxun 935 Plus to check my Wouxun 1000g Plus base station.  The base station receives the signal from the handheld and I can hear the person transmitting but the base station will not talk to the handheld.  I "reset" the base station as per the instructions and still cannot transmit...the red light comes on but I can't transmit to the handheld.

My radio will not transmit on 8-14. 

I don't understand how to input the tones...yes I watch your video and read the handbook.  I am a newby and know nothing about radios.

Thank you for responding!

Sam

I was addressing  OFFROADERX 2nd question.