WSCU736 Posted May 25 Report Share Posted May 25 Can you run the ground wire right next to the coax line? Or wrap it around the coax? Quote Link to comment Share on other sites More sharing options...
0 BoxCar Posted May 25 Report Share Posted May 25 I wouldn't wrap the two around each other, but they should be okay in parallel. WRYZ926 and Socalgmrs 2 Quote Link to comment Share on other sites More sharing options...
0 WSCU736 Posted May 25 Author Report Share Posted May 25 33 minutes ago, BoxCar said: I wouldn't wrap the two around each other, but they should be okay in parallel. Okay thanks for the info. Quote Link to comment Share on other sites More sharing options...
0 SteveShannon Posted May 25 Report Share Posted May 25 2 hours ago, Jasper said: Can you run the ground wire right next to the coax line? Or wrap it around the coax? I don’t understand why you would. Run it to a ground rod. Then bond that ground rod to you utility service ground. Quote Link to comment Share on other sites More sharing options...
0 WSBT338 Posted June 19 Report Share Posted June 19 Rather than start a new thread I thought I’d jump in here with a similar question. I plan on running my coax down the antenna mast then attaching a bronze ground clamp to the mast about 4 feet off the ground where I’ll run 10 AWG wire to the utility co’s ground rod. My coax will continue down the mast and make its way to my new $1,500 repeater. But I’ll install a lightning arrestor between the coax and the repeater. Just a little apprehensive that my coax will be zip tied to the mast that will hopefully divert the electric charge down the wire to the rod and not continue down the coax. And even if it does it will be greeted with the arrestor. Am I pretty safe with this setup? Quote Link to comment Share on other sites More sharing options...
0 gortex2 Posted June 20 Report Share Posted June 20 The main idea of the ground is to help the surge to ground. I'd up your wire from 10 to at minimum 6 guage. Lightening arrestor should be as the coax enters the building. WSBT338 and WRXB215 2 Quote Link to comment Share on other sites More sharing options...
0 WRYZ926 Posted June 20 Report Share Posted June 20 All good advice given by others. Definitely go with 6 gauge wire for grounding the mast/tower. I do run 10 gauge from my lightning arrestors to ground, but that is such short run. I made my own wall passthrough which has a piece of 1/4" all thread for a grounding point. All of my lightning arrestors are attached to it with 10 gauge wire and I have a single 6 gauge wire going from the all thread to my ground rod. WSBT338 1 Quote Link to comment Share on other sites More sharing options...
0 WSBT338 Posted July 20 Report Share Posted July 20 Thanks for the advice to you both. I not only upgraded my mast ground wire to 6AWG, I also stepped up the coax to LMR400 (from RG8X). It took two 25’ cables to reach from my antenna to my repeater which is in the bedroom on the other side of the wall. I put the lightening arrestor between. That and the mast are attached to the ground rod. Am I good? Socalgmrs and WRUU653 1 1 Quote Link to comment Share on other sites More sharing options...
0 WRXB215 Posted July 22 Report Share Posted July 22 I got a kick out of this one, thought I would share. WRUU653 1 Quote Link to comment Share on other sites More sharing options...
0 back4more70 Posted July 22 Report Share Posted July 22 I can appreciate all of these questions, but does no one ever hire an electrician? WRUU653 1 Quote Link to comment Share on other sites More sharing options...
0 WRQC527 Posted July 22 Report Share Posted July 22 5 minutes ago, back4more70 said: I can appreciate all of these questions, but does no one ever hire an electrician? Reminds me of this classic video. WRUU653, WRXB215 and WSBT338 3 Quote Link to comment Share on other sites More sharing options...
0 WRUU653 Posted July 22 Report Share Posted July 22 4 minutes ago, WRQC527 said: Reminds me of this classic video. This is gold!!! WRQC527 1 Quote Link to comment Share on other sites More sharing options...
0 WSBT338 Posted July 22 Report Share Posted July 22 29 minutes ago, back4more70 said: I can appreciate all of these questions, but does no one ever hire an electrician? I did. But he just did what I asked him to do. I guess the only thing outside of his scope was where I put the lightening arrestor - which was really the only place I could put it without splicing one of the 25’ coax. He did a great job. Guess I was just showing off a bit, too. Love how it turned out. I can reach my entire neighborhood now and have a B-Tech RPT50 Repeater inside. The mess in my close-up photo that consists of the orange and black wires (with white paint) aren’t on me. That’s Comcast I think Quote Link to comment Share on other sites More sharing options...
0 WRUU653 Posted July 22 Report Share Posted July 22 On 7/20/2024 at 6:08 AM, WSBT338 said: I don’t want to be negative here but your electrician may want to familiarize themselves with the electrical code section 110.26 Spaces About Electrical Equipment. Particularly the section and tables on working clearances. Your local utilities company also will have rules. WSBT338 and SteveShannon 2 Quote Link to comment Share on other sites More sharing options...
Question
WSCU736
Can you run the ground wire right next to the coax line? Or wrap it around the coax?
Link to comment
Share on other sites
13 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.