Jump to content

UV-5G repeater channels


Guest WSEP725

Recommended Posts

Guest WSEP725

There are nine repeater channels. How do you program them?

I have repeaters programmed in by switching to frequency mode, entering frequency, going to menu and entering ctcss codes, then saving to an unused channel. But how do I set up the actual repeater channels manually?

Link to comment
Share on other sites

23 minutes ago, Guest WSEP725 said:

There are nine repeater channels. How do you program them?

I have repeaters programmed in by switching to frequency mode, entering frequency, going to menu and entering ctcss codes, then saving to an unused channel. But how do I set up the actual repeater channels manually?

In a GMRS radio, just choose one of the pre-programmed repeater channels, 23-30 (there are 8 of them) and set the necessary tone to get into the repeater. 
 

Link to comment
Share on other sites

Guest WSEP725
30 minutes ago, SteveShannon said:

In a GMRS radio, just choose one of the pre-programmed repeater channels, 23-30 (there are 8 of them) and set the necessary tone to get into the repeater. 
 

How does know the frequency

Link to comment
Share on other sites

1 hour ago, Guest WSEP725 said:

How does know the frequency

Channel No. Frequency Power (ERP in Watts)
1 462.5625 2 W
2 462.5875 2 W
3 462.6125 2 W
4 462.6375 2 W
5 462.6625 2 W
6 462.6875 2 W
7 462.7125 2 W
8 467.5625 0.5 W
9 467.5875 0.5 W
10 467.6125 0.5 W
11 467.6375 0.5 W
12 467.6625 0.5 W
13 467.6875 0.5 W
14 467.7125 0.5 W
15 462.5500 2 W
16 462.5750 2 W
17 462.6000 2 W
18 462.6250 2 W
19 462.6500 2 W
20 462.6750 2 W
21 462.7000 2 W
22 462.7250 2 W
Link to comment
Share on other sites

1 minute ago, WRXB215 said:
Channel No. Frequency Power (ERP in Watts)
1 462.5625 2 W
2 462.5875 2 W
3 462.6125 2 W
4 462.6375 2 W
5 462.6625 2 W
6 462.6875 2 W
7 462.7125 2 W
8 467.5625 0.5 W
9 467.5875 0.5 W
10 467.6125 0.5 W
11 467.6375 0.5 W
12 467.6625 0.5 W
13 467.6875 0.5 W
14 467.7125 0.5 W
15 462.5500 2 W
16 462.5750 2 W
17 462.6000 2 W
18 462.6250 2 W
19 462.6500 2 W
20 462.6750 2 W
21 462.7000 2 W
22 462.7250 2 W

This is an FRS chart, gmrs is higher watts and does not include the repeater channels that the poster was asking about. 

Link to comment
Share on other sites

14 hours ago, Guest WSEP725 said:

How does know the frequency

Here’s the frequency table in Wikipedia.

https://en.wikipedia.org/wiki/General_Mobile_Radio_Service#Frequency_table

Note that channels 15-22 are used for simplex communications (meaning that transmission and reception is done on the same frequency, taking turns to talk). Channels 15-22 are also used for duplex communications by the repeater.  The repeater receives a transmission on one of the frequencies marked 15R through 22R and simultaneously retransmits it on a frequency that is 5 MHz lower, marked 15-22 (no ‘R’).

Link to comment
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.