UV-5G repeater channels

[Guest WSEP725]

There are nine repeater channels. How do you program them?

I have repeaters programmed in by switching to frequency mode, entering frequency, going to menu and entering ctcss codes, then saving to an unused channel. But how do I set up the actual repeater channels manually?

[SteveShannon]

23 minutes ago, Guest WSEP725 said:

There are nine repeater channels. How do you program them?

I have repeaters programmed in by switching to frequency mode, entering frequency, going to menu and entering ctcss codes, then saving to an unused channel. But how do I set up the actual repeater channels manually?

In a GMRS radio, just choose one of the pre-programmed repeater channels, 23-30 (there are 8 of them) and set the necessary tone to get into the repeater. 
 

[WRXP381]

18 minutes ago, SteveShannon said:

In a GMRS radio, just choose one of the pre-programmed repeater channels, 23-30 (there are 8 of them) and set the necessary tone to get into the repeater. 
 

This.  

[Guest WSEP725]

30 minutes ago, SteveShannon said:

In a GMRS radio, just choose one of the pre-programmed repeater channels, 23-30 (there are 8 of them) and set the necessary tone to get into the repeater. 
 

How does know the frequency

[SteveShannon]

51 minutes ago, Guest WSEP725 said:

How does know the frequency

GMRS radios come preprogrammed with the right frequencies. 

[WRXP381]

51 minutes ago, Guest WSEP725 said:

How does know the frequency

A “gmrs” radio already has the frequencies with off set programmed in.  Just add the tones and go. 

[WRXB215]

1 hour ago, Guest WSEP725 said:

How does know the frequency

Channel No.	Frequency	Power (ERP in Watts)
1	462.5625	2 W
2	462.5875	2 W
3	462.6125	2 W
4	462.6375	2 W
5	462.6625	2 W
6	462.6875	2 W
7	462.7125	2 W
8	467.5625	0.5 W
9	467.5875	0.5 W
10	467.6125	0.5 W
11	467.6375	0.5 W
12	467.6625	0.5 W
13	467.6875	0.5 W
14	467.7125	0.5 W
15	462.5500	2 W
16	462.5750	2 W
17	462.6000	2 W
18	462.6250	2 W
19	462.6500	2 W
20	462.6750	2 W
21	462.7000	2 W
22	462.7250	2 W

[WRXP381]

1 minute ago, WRXB215 said:

Channel No.	Frequency	Power (ERP in Watts)
1	462.5625	2 W
2	462.5875	2 W
3	462.6125	2 W
4	462.6375	2 W
5	462.6625	2 W
6	462.6875	2 W
7	462.7125	2 W
8	467.5625	0.5 W
9	467.5875	0.5 W
10	467.6125	0.5 W
11	467.6375	0.5 W
12	467.6625	0.5 W
13	467.6875	0.5 W
14	467.7125	0.5 W
15	462.5500	2 W
16	462.5750	2 W
17	462.6000	2 W
18	462.6250	2 W
19	462.6500	2 W
20	462.6750	2 W
21	462.7000	2 W
22	462.7250	2 W

This is an FRS chart, gmrs is higher watts and does not include the repeater channels that the poster was asking about. 

[WRXB215]

@WRXP381 is right. I was just spewing out frequencies.

[SteveShannon]

14 hours ago, Guest WSEP725 said:

How does know the frequency

Here’s the frequency table in Wikipedia.

https://en.wikipedia.org/wiki/General_Mobile_Radio_Service#Frequency_table

Note that channels 15-22 are used for simplex communications (meaning that transmission and reception is done on the same frequency, taking turns to talk). Channels 15-22 are also used for duplex communications by the repeater.  The repeater receives a transmission on one of the frequencies marked 15R through 22R and simultaneously retransmits it on a frequency that is 5 MHz lower, marked 15-22 (no ‘R’).

[AdmiralCochrane]

What is the frequency Kenneth?