Jump to content

Search the Community

Showing results for tags 'Motorola'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • General Mobile Radio Service (GMRS)
    • Guest Forum
    • General Discussion
    • Technical Discussion
    • Equipment Reviews
    • FCC Rules Discussion
    • myGMRS.com
    • National and Regional GMRS Nets
  • Other Radio Services
    • Family Radio Service (FRS)
    • Multi-Use Radio Service (MURS)
    • Amateur Radio (Ham)
    • 900 MHz License-Free Radios (ISM)
    • Meshtastic and Reticulum
  • Off-Topic
    • Miscellaneous Topics
  • TreasurecoastGMRSclub's Radio Etiuette
  • TreasurecoastGMRSclub's Radio gear
  • South Western PA GMRS's Repeaters
  • South Western PA GMRS's Welcome New Members
  • South Western PA GMRS's Repeater System
  • South Georgia GMRS's SOUTH GEORGIA GMRS REPEATER STATUS
  • South Georgia GMRS's SOUTH GEORGIA GMRS NEWS
  • WV/OH GMRS's Repeater Pulled from Tower
  • NOVA GMRS's Area Repeaters
  • NOVA GMRS's MEET UPS / EVENTS
  • NOVA GMRS's General Conversations Related to NOVA GMRS
  • DELMARVA GMRS's Repeaters
  • DELMARVA GMRS's Events
  • ISLACOMM GMRS's Topics
  • ISLACOMM GMRS's Topics
  • Maryland GMRS Network's Topics
  • Maryland GMRS Network's Topics
  • Alaska GMRS's Welcome!
  • Southwest Virginia GMRS's Topics
  • Ozark Plateau GMRS's Discussions
  • Moline, IL QC Area GMRS's Clubs Around QC
  • Moline, IL QC Area GMRS's Topics
  • NORTH CAROLINA GMRS (GMRS Outlaws Extension)'s Repeater Listings
  • NORTH CAROLINA GMRS (GMRS Outlaws Extension)'s Repeaters and simplex listings
  • GMRS Outlaws's Net Check-in
  • GMRS Outlaws's Repeaters
  • CLAARC GMRS's Moderators and Admins
  • Mississippi GMRS Communications's Club Announcements
  • Mississippi GMRS Communications's Club Repeaters
  • BROADNET GMRS REPEATER SYSTEMS's Topics thank you
  • The Mesa Crest Repeater Club's TMCRC Repeaters Estimated Coverage
  • West Michigan GMRS's Guides & Discussion
  • Chicagoland GMRS's Discussions
  • Central Florida GMRS's Topics
  • Missouri GMRS's Topics
  • Vista Woods GMRS's Topics
  • South Central Tennessee GMRS's New Member Info

Calendars

  • Community Calendar
  • ISLACOMM GMRS's Events
  • Southdade GMRS Club's Events
  • Southwest Virginia GMRS's Events
  • Moline, IL QC Area GMRS's Events
  • Mississippi GMRS Communications's Classes and Events
  • PRCC Inc / WP 444 GMRS Net's Aguada GMRS Net on 444 ATA repeater
  • The New Horizons's Events
  • Chicagoland GMRS's Events Calendar

Categories

  • Two-Way Radios
  • Repeaters
  • Antennas
  • Computers
  • Misc. Electronics
  • Chicagoland GMRS's Adverts

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


Website URL


Skype


Slack


Name


Unit Number

 
or  

Location


Interests

Found 22 results

  1. I have 2 Motorola XPR8400 UHF 450-512Mhz repeaters with duplexers. They've been taken out of a working system. They both put ~44Watts out to dummy load. Asking $500 + shipping from zip 60005. They have simple features enables; FM and digital mode, IP Site connect, enhanced privacy, transmit interupt and satelite receiver. PM me please if interested.
  2. Hello Internet. I'm trying to use 2 Motorola CDM1250 radios for a repeater configuration with a motorola RICK, and I'm having a difficult time trying to get the cables from the CDMs to power and control the Rick. I know the rick and cables work because they came out of my working GR300, but they won't now. I'm confident it's some settings in the CPS but I've played around with it extensively and I've became exasperated. There's some magic setting I'm missing. Does anyone have an idea? **Pin 4 and Pin 12 on the RX radio is set because I want to use the RICKs knockdown feature where if I transmit a DTMF tone, it'll kill the TX repeater with ignition sense.
  3. Hi all, I'm looking for suggestions for what you all consider the best commercial UHF mobile and handheld radios that can be used for GMRS, also the easiest to acquire CPS software for programing, Thanks
  4. I have a Motorola MTR 2000 repeater. I have an ICS Controller board in the J5 system connector, going to a URIxB via the DB-9 to DB-25, assembled by me. I've done days worth of research to no avail. The repeater & URI both show TX if I key the radio in the simple_usb_tune menu. Hitting the repeater with a HT, RX lights up but no TX on the URI or MTR. Not sure if this is RSS programming or on the URI/Asterisk side. Any suggestions would be greatly appreciated. Thank you all!
  5. Pretty new to 2 way radio...Been rocken the Baofeng and I'm ready to step it up. I'm leaning towards a commercial radio that I can use on gmrs frequencies leaning towards a motorola 5000 (and yes I know that is not a legal gmrs radio that's not what I'm asking) I really value reliability and and would like something multi purpose, one concern is that they are getting old, would it be a bad move to spend that much money an older radio? I'm currently considering buying an xts 5000 military version uhf2 with battery and charger plus some programing for 400$ a couple others that a have considered are EF Johnson 5100 ant Anytone AT-D878UVII PLUS Anyone have have any advice on this?
  6. Hello internet! Very odd and specific question to ask, but does anyone have or know where I can buy a Motorola XTS4000 belt clip? I have a xts4000 for guest services at work and I love the appeal of the flip phone ascetic and would like to have a better way of carrying my radio aside from stuffing it in a pocket. If anyone has one and would be willing to sell it to me, I'm open to the idea. I've tried my best to find simular ones but generic pouch kinds are unfavorable due to having to flip the radio open to change channels and zones. Thanks!
  7. I need help programming my Motorola MCS2000. When I attempt to read the radio I receive an error, "Communication with radio failed". Here's how I reproduce the issue: Connect radio with USB to radio's mic port Open MCS2000 CPS software Choose File > Read Device Select COM1 (the port associated with the USB cable), choose "OK" Receive error, "Communication with radio failed"Here's my setup: Radio Model M01MX+713WRadio ID M01SHL9PW4AN.Software: MSC2000 CPS Ver. R02.02.00. Cable: MSC2000 FTDI USB Serial Cable (ordered from BlueMax49ers)Cable USB driver: FTDI ver. 2.12.28.0 (Date: 8/16/2017)Computer OS: Windows 7 Home Premium SP1, 64-bit Operating SystemAny suggestions would be greatly appreciated. Thank you, Doug T (WRFL449)
  8. I’m selling a Motorola GR1225 45 watt repeater with built in duplexer. It’s programmed for GMRS frequencies. Prefer meet up in Florida but can get a quote to ship. Asking $525 obo. I will be at the Melbourne Ham Fest this Saturday 10/8 Channel 1 462.625 PL 1B 107.2 Channel 2 462.600 PL 1B 107.2
  9. From the album: PACNWComms - Misc Photos

    Lineup of my current GMRS radios. Newest addition is the XPR7550e on the far right. That was just purchased recently, and is being programmed for use on local repeaters and simplex freqs. HT-1250's like the one on the left are still very useful for this purpose as well. Starting left to right: Motorola HT1250, Garmin Rino 530, Anytone UV-878D, Motorola XPR6550, Motorola XTS1500 M1.5, Motorola XPR7550e.

    © PACNWComms

  10. From the album: PACNWComms - Misc Photos

    I make Radio over Internet Protocol kits for sites for my current employer. There are fifty sites spread across the United States that wish to be connected to a central dispatch location. For Motorola ASTRO based sites, this is done through a Conventional Channel Gate Way (CCGW) device. For Trbo sites, this is done through Zetron IP interface. CCGW's have eight connections, while Zetron interfaces only have a max of two links each. Radio audio is converted to IP data, and then processed by ASTRO dispatch consoles for distant sites via CCGW or Zetron 6300 series IP interface devices. Shown is a Motorola XPR4550 UHF mobile, powered by an Astron power supply, and connected via its accessory connector to the Zetron 6300 IP interface for Push to Talk and TX/RX audio. I use this setup to test connections on my own flat network before sending hardware across the country. This is a somewhat expensive method of connecting radio to the Internet, as the mobile is often $500/1000/5000 (Trbo XPR4550/Trbo XPR5550e/APX4500), $2700 for the Zetron IP interface and $120 for the Astron power supply. Then there are the ancillary items, like the antenna and mount, coax, network hardware and jacks, and Internet connection.

    © WROL355

  11. From the album: PACNWComms - Misc Photos

    Motorola APX900 800MHz P25 Phase 1 radio on left, and XPR7550e UHF Trbo/Analog radio on right. Showing how similar they look and how this may be showing streamlined manufacturing of products by Motorola Solutions Inc. The APX900 is a Model 2, with display and partial keypad. The XPR7550e comes in this version with display and full keypad, no Model 2 equivalent, and the non display/keypad version is the XPR7350e. The UHF XPR7xxxe series radios also cover the entire UHF band 403-523-525 MHz without requiring hex editing like the previous XPR6xxx series radios. Having GMRS frequency coverage, they are excellent GMRS radios, but you will need Motorola CPS software, an appropriate computer, and programming cable to set them up for use. Still, many see this as useful, after using cheaper radios with free programming software, and experiencing the performance of lower cost equipment.

    © WROL355

  12. From the album: PACNWComms - Misc Photos

    Stacked Motorola mobile radios. UHF XPR4550 on top and older CDM1250 VHF on the bottom.

    © WROL355

  13. Hello! First post on any forum and recently got my GMRS license too, So needless to say I'm excited to get out there! I have gotten a Kenwood radio for myself to adventure in GMRS thanks to this forum and it's been a good little unit. Now just a few days ago I was out at my states surplus sale where they sell old desktop pcs, furniture, cars ect. Well they had a Motorola APX7000 on the shelf with no battery, antenna or anything, and I bought it on its circulation sale for $500. Before I go crazy and get a battery, charger, antenna and have programmed by someone, I would like to ask if it would be a radio I can use on GMRS and repeaters. I know this kind of question gets asked a lot and I'd hate to add to that annoyance but I've done the better part of my do diligence in research but I'm still left asking. It doesn't have a front display or keypad for FPP, just the top screen like my Kenwood. I've tried to find any forum posts relating to APX on GMRS here and on other websites but I've come up short. It operates on UHF in the lower band, 380-470mhz. I mainly got it because of the price and if I can use it, then great! If not, then I can try to sell it for a profit. Win win for me. If I need to give more details then I can try my best to, otherwise let me know!
  14. FCC List of Equipment and Services That Pose National Security Threat Released On: Mar 12, 2021 http://www.fcc.gov/document/fcc-list-equipment-and-services-pose-national-security-threat "FCC's Public Safety and Homeland Security Bureau publishes a list of communications equipment and services that are deemed a threat to national security, consistent with requirements in the Secure and Trusted Communications Networks Act of 2019" A later link takes you to a document with more detail on Hytera's issues: "Covered Equipment or Services Video surveillance and telecommunications equipment produced or provided by Hytera Communications Corporation, to the extent it is used for the purpose of public safety, security of government facilities, physical security surveillance of critical infrastructure, and other national security purposes, including telecommunications or video surveillance services produced or provided by such entity or using such equipment." Commentary: It looks like Motorola is getting great value for their DC lobbying investments. Some GMRS licensees that use Hytera products (including me) will find it amusing that they have again gone to the courts to kill their most viable competitor. So, instead of providing products that meet their customer's needs, Motorola has found it more cost-effective to pursue the low road. They are getting really lazy - not the same company when it was under the Galvins. For those not having used Hytera's higher-end mobile, portable and repeater products (similar build quality to Motorola in their DMR lines, designed originally for the Chinese police forces, etc.), you will find them to be superior from a feature, capability and ETSI compliance standpoint. Not even close. While I support death to the CCP (our greatest enemy) and the concern over camera equipment, I will give credit to Hytera for their product design efforts, even though they likely lifted some marginally important IP from Motorola (another ongoing litigation issue). As the repeaters have Ethernet connectivity, I can see a concern there that might be mitigated through a simple "air gap". This policy will really kick Hytera's a** in the utility market and elsewhere. They do not manufacturer any P25 products. FCC List of Equipment and Services That Pose National Security Threat:
  15. Greetings all, I’m running a Motorola RKR1225 40 watt repeater that should be transmitting 30+ watts after duplexer but I’ve only ever realized 27.5 watts however, that’s not the main issue. When the unit first starts transmitting my test meters (tried three different ones) all show 27.5 watts. But, the longer the repeater remains transmitting, the lower the transmit power goes. It’s a slow but steady drop from 27.5 watts down to 23 watts. I’ve double checked all of my connections and my SWR meters all register 1.00 (using a DM-408B and temporarily using a 35’ run of LMR400 since I’m hoping to relocate the system to a local hospital for better range and saturation and decided to save my heliax cable for the new location. I just can’t figure out why the constant drop in tx output power. As always, I appreciate any and all suggestions and look forward to the replies. John WRDM373
  16. Hello all, I'm fairly new to the radio world even though you'd think my USMC Infantry background along with my current Firefighting gig would lead you to believe different. I should've paid closer attention obviously. I recently purchased a pair of Motorola MS350R GMRS/FRS radios. Wasn't even aware of the features or what the capabilities where until thumbing through the user manual. After some time on Google, I applied for and was granted a GMRS license from the FCC. I have spent the past couple of days trying to get these things to work on the repeater function with no luck. I'm a little ways from the nearest repeater but, I don't receive anything. Not even broken communication. I don't believe these things to be digital so I'm under the impression that I should still get garbage as a conformation. But to dive even deeper on the subject, I do not even know what I'm doing. I have no understanding of the freqs, or how to set the radio up in the first place. Everything I can find online is already a step above my understanding. Other than looking at what the channel freqs are and trying to match them (kinda), I have no idea of what's what. I DO know what channels are FRS, FRS/GMRS, and repeated GMRS. Also would like some clarity on the FRS/GMRS channels if you wouldn't mind. Any help will do. All I ask is that you assume I know nothing. Your wisecracks and jokes are encouraged as long as learning is achieved. Thanks in advance, K. Brown
  17. Hey guys and gals! I've got a big pile of 90s vintage Spirits and Talkabout Distances. The antennas have all gone brittle, and are exceeding the point of effective duct tape repairs. There's a mixture of Spirits, model SV-22, running on MURS in blue and green dot, and Talkabout Distance and Distance DPS units. The antennas are all going, and the decay is accelerating. I like handing these out to nontechnical family members, because there's not anything they can screw up other than changing the channel unintentionally. But RF burns are a bad thing, so ... Help me pick out some antennae, please! Ideally, they'll be visually distinctive; Motorola's latest ones are stamped with UHF and VHF, which is nice, but I'm open to third-party ones and have a mild preference for silicone jacketing. Thanks!
  18. All the love here for the M1225 has convinced me. So I made an offer on one. This morning, my offer was accepted. What's the easiest and cheapest way to program this puppy?
  19. So I had this interesting idea while looking at some "Tactical" repeaters owned by the Texas Department of Transportation. Basically they are VHF boxes with Li-on battery packs about the size of your average Pelican handgun case, a 5W full duplex board and a notchplexer. Then I started running some power draw numbers with the Maxon data radios…then the Ritron data radios, and then Tecnet released a new line of smaller data radios along side their Maxon line at IWCE this year. Then 11 Motorola RNet 450's plopped in my lap from a SK's estate. Crystal controlled, single channel data radios that'll run 4W out (on what is probably a 10% duty cycle) with some other junk in the case that isn't actually needed for "repeater" duty. So I've though about throwing a repeater (or two) together in an ammo can, adding a small duplexer (the 20W rated Jensen duplexer will fit nicely in a 30 cal can), adding some external heat sinking and a battery and seeing how it runs. Just gotta track down the service manual for the radios if I'm going to use the RNet radios… Any thoughts?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.