Jump to content

BTECH... Tech


WRVG593

Recommended Posts

So what is the communities opinion on BTECH and their equipment? The only equipment of theirs I have is a BTECH U25 20-40W amplifier. (I am currently having troubles with it, so I will hold my judgement until its fixed) I would love to know how well their radios in general perform, whether they do better in Mobile Units or HT's, etc. If anyone wants to hop in and share their experiences with the company, it'd be great!

Link to comment
Share on other sites

Wouldn't be my first choice. They're finally starting to make some progress in their recent gear (2nd gen gmrsv2), but a lot of it is overly restricted in terms of tx channels. My gmrs 50x1, the factory channels are it for tx, anything else you add is Rx only, even if it's in band for gmrs. It also doesn't seem to be holding power on high...starts high and drops.

Link to comment
Share on other sites

BTech has, at least in the past, had worse quality (or quality control) than Baofeng.  BTech sold knock-offs that were responsible for many of the older bad reports for Baofeng radios.  They were not made in America then AFAIK, don't know now because I won't buy one of their radios.  The only one I ever got was an "8W" that only did the same 4.5W on 2m and 0.5W on 440 (paid double for less).  Another similar brand I don't trust for radios is Abbree.  These companies may improve over time but most start out selling unreliable junk.  I may risk it for accessories like charging cables if there's no other vendor.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.