Jump to content
  • 0

TD-H3 FPP Issues - Need Help


marcspaz

Question

I am having an issue with my TD-H3 radios.  I read the manual, search the web with 3 different search engines, and no luck finding anything useful.  All 3 of them behave the same way, so I think I am doing something wrong.  Since they are getting popular for GMRS, I figured I would see if anyone else here had the same problem and resolved it.

 

So, short version, everything works if programmed in Chirp.  However, I can't change any offset or tone values if I attempt to set them through the FPP.

 

In VFO mode I cannot configure the CTCSS, DCS, Offset Direction nor Offset values; menu items 10, 11, 12, 13, 23 and 24.  When I attempt to set a value, and press the BT/menu button to confirm, the values set back to off/none/0.000/etc.

 

So, here is the odd part... If I use Chirp-Next to program the radio, it programs perfectly and everything works fine.  In existing memory channels that have been programmed with Chirp, I can successfully change any of those values.  BUT... if I manually save a new memory channel via FPP, I still can't manipulate any of the aforementioned menu items in the new saved item.

 

I have reset the radio several times.  This problem exists regardless of if the radio is in Ham, GMRS or Normal mode.  I tried enabling and disabling a bunch of other features to see if there is an impact, but nothing seems to matter.  When I am planning ahead, this isn't really an issue, but if I am out and about or have an emergency and need to program a repeater into the radio, it's just not possible with the FPP.

 

So, any ideas about what I am doing wrong?

 

Thanks,

Spaz

 

 

Link to comment
Share on other sites

14 answers to this question

Recommended Posts

  • 0

So, I just found that if I program the offset frequency and direction in the A/B Channel tab on Chip, I can then change them or enable/disable them.  I don't see any way to change the tone settings in the software to 'prime' the setting like I did with the offset.

 

Getting closer, but can still use some help, if anyone knows.

Link to comment
Share on other sites

  • 0
On 5/1/2024 at 3:23 PM, nokones said:

Never mind. I just checked and the Odmaster App does not support the H3 radio.

ODMaster App does support the TD-H3, but in "Select Model" you have to choose "TIDRADIO" not "TID" and you'll find all three versions: TD-H3 Ham, TD-H3 GMRS, and TD-H3.
My issue is if I select "Repeater" and search by frequency, it doesn't seem to go up high enough to get to the GMRS band (462 MHz) band.
Even if you "Select Model" the TD-H3 GMRS.
 

Link to comment
Share on other sites

  • 0
13 hours ago, spulley said:

My issue is if I select "Repeater" and search by frequency, it doesn't seem to go up high enough to get to the GMRS band (462 MHz) band.
Even if you "Select Model" the TD-H3 GMRS

 

Same issue here. Plus, you have to save them one at a time, instead of bulk imports. I suppose I can do that on Chirp, and then upload to ODM, but ot would be a nice feature. 

Link to comment
Share on other sites

  • 0

Hello, I'm glad I found this forum because Most of the people using the TD-H3 are using it in HAM mode.  I'm also interested to understand what's going on with the offset and Chirp. If I program in a repeater in Chirp, it seems to program OK but on the radio, it shows no offset and no direction. Is that because the offset is automatic on this radio? I do see the CTCSS tone I put in Chirp. But no + and no offset amount showing on the radio itself. 

 

Also to the other discussion about programming with ODmaster app.   I watched a video that said there were no GMRS repeaters added to the app to download but said hopefully the app maker might add them in the future. Any thoughts on this?  I don't have a HAM license, I do have a GMRS license.

 

 

 

Link to comment
Share on other sites

  • 0
3 minutes ago, 49ohms said:

I too am seeing an issue when I program an TD-H3(unlocked) with a GMRS repeater in Chirp, it seems to program OK; but on the radio, it shows no offset and no direction.

Just curious, since this issue came up earlier this week in reference to the Baofeng UV5R. Does the saved memory transmit with the proper offset even though the radio's programming doesn't show an offset? It's a quirk, if you will, with some of these radios. 

Link to comment
Share on other sites

  • 0
5 minutes ago, WRQC527 said:

Just curious, since this issue came up earlier this week in reference to the Baofeng UV5R. Does the saved memory transmit with the proper offset even though the radio's programming doesn't show an offset? It's a quirk, if you will, with some of these radios. 

As long as it shows different Rx and Tx frequencies, it doesn't need to show an offset.

 

Link to comment
Share on other sites

  • 0
44 minutes ago, SteveShannon said:

As long as it shows different Rx and Tx frequencies, it doesn't need to show an offset.

 

With the PTT button not pressed it should show a frequency of 462.XXXXX. With the PTT pressed, it should show a 467XXXXX frequency. Wait, that's a 5 MHz offset isn't it?

Link to comment
Share on other sites

  • 0
3 hours ago, SteveShannon said:

As long as it shows different Rx and Tx frequencies, it doesn't need to show an offset.

 

Exactly. This has been mentioned several times before. It'd be nice if it showed it but it doesn't. As BoxCar mentioned above, the Tx frequency shows when you press PTT though.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.