8nannyfoe Posted February 11, 2021 Report Posted February 11, 2021 So, I finally got approval to drill a hole for a hard mount antenna. ONE small caveat to the deal. It must be covert as possible. My wife said theres no way I will be installing the Midland 6db antenna on top of the car. (something about a remote control looking car bla bla blah...LOL). So I found the tiny 1/4 wave antenna and a phantom antenna. The wife said that one will look like I left a soda can on the roof but still says its ok. SO, which one is better? I will be pushing 50watts on my new Wouxon . The main reason I ask is I read a comment that someone said the phantom antennas are glorified dummy loads!! Yowza! I don't want that! But its claims 3db gain? Could I get some real world range examples and feedback on both the phantom antenna and the 1/4 wave stubby please. (to give an idea of my local terrain, I am flat here in Florida and live in a fairly populated SW Florida area with plenty of cinderblock single story homes. My current antenna is the tiny stock antenna that came with my Midland 105. I get an average of about 2 miles RX/TX to another identical rig. 4 miles to my "home base" set up with a Laird antenna. Quote
kidphc Posted February 11, 2021 Report Posted February 11, 2021 How's about a fold over or a cap. You put the antenna when you have the car. Take it off when she has it? Sent from my SM-G975U using Tapatalk 8nannyfoe 1 Quote
NCRick Posted February 11, 2021 Report Posted February 11, 2021 So, I finally got approval to drill a hole for a hard mount antenna. ONE small caveat to the deal. It must be covert as possible. My wife said theres no way I will be installing the Midland 6db antenna on top of the car. (something about a remote control looking car bla bla blah...LOL). So I found the tiny 1/4 wave antenna and a phantom antenna. The wife said that one will look like I left a soda can on the roof but still says its ok. SO, which one is better? I will be pushing 50watts on my new Wouxon . The main reason I ask is I read a comment that someone said the phantom antennas are glorified dummy loads!! Yowza! I don't want that! But its claims 3db gain? Could I get some real world range examples and feedback on both the phantom antenna and the 1/4 wave stubby please. (to give an idea of my local terrain, I am flat here in Florida and live in a fairly populated SW Florida area with plenty of cinderblock single story homes. My current antenna is the tiny stock antenna that came with my Midland 105. I get an average of about 2 miles RX/TX to another identical rig. 4 miles to my "home base" set up with a Laird antenna.Please report if you do try one. Because of a changed mounting location we can't attribute the performance completely to the Laird Phantom but there was a decrease in communication distance once installed on my friend's vehicle compared to the tiny mag mount his mxt275 came with. The MNO mount make it an easy swap when the wife isn't looking... MacJack and 8nannyfoe 2 Quote
8nannyfoe Posted February 11, 2021 Author Report Posted February 11, 2021 How's about a fold over or a cap. You put the antenna when you have the car. Take it off when she has it? Sent from my SM-G975U using TapatalkInteresting. A fold over will outperform both of the options I gave? Never thought of that, but honestly, I don't think she would want that anyway, just more of a data point I'm interested in. The cap is not gonna be something I would do as I dont want to be climbing on the roof that often. Open to other options also!! keep em coming! Quote
kidphc Posted February 11, 2021 Report Posted February 11, 2021 I had big gains going from a 1/⁴ to 1/2. Looking at fold over super gainers now. You have to note that a puck antenna if it doesn't clear a roof rack, is going to be a poor performer. You never said on what type of car this would be going on.. I would think a ⁵/8 on a hatch mount would work better. Sent from my SM-G975U using Tapatalk 8nannyfoe 1 Quote
8nannyfoe Posted February 11, 2021 Author Report Posted February 11, 2021 I had big gains going from a 1/⁴ to 1/2. Looking at fold over super gainers now. You have to note that a puck antenna if it doesn't clear a roof rack, is going to be a poor performer. You never said on what type of car this would be going on.. I would think a ⁵/8 on a hatch mount would work better. Sent from my SM-G975U using TapatalkHmm....so the hatch mount would mount near the bumper (lower) portion of the hatch? Would be pretty low and have alot of "null area" blocked by the body of the car? I actually like this idea though if it would outperform the 1/4 wave or Phantom. Yes, the puck style has many bad reviews so I never considered them. Quote
kidphc Posted February 11, 2021 Report Posted February 11, 2021 You could mount it up higher on the hatch. You could also remove it for the non rc car look. Yes, you will get shadowing, it is less then ideal for ground planes. But no drilling either Quote
Radioguy7268 Posted February 11, 2021 Report Posted February 11, 2021 A 1/4 wave 6 inch 'hatpin' antenna every day of the week. If you don't like chrome, get one in black. Get a spare or two in case she runs through the car wash. Cost is about $6. Retail. JohnE, Elkhunter521, Extreme and 3 others 6 Quote
berkinet Posted February 11, 2021 Report Posted February 11, 2021 What @Radioguy7268 said ++ SteveC7010, 8nannyfoe and Elkhunter521 3 Quote
Extreme Posted February 12, 2021 Report Posted February 12, 2021 A 1/4 wave 6 inch 'hatpin' antenna every day of the week. If you don't like chrome, get one in black. Get a spare or two in case she runs through the car wash. Cost is about $6. Retail. And you can get them that mount in a 3/8" hole. SteveC7010 and 8nannyfoe 2 Quote
8nannyfoe Posted February 12, 2021 Author Report Posted February 12, 2021 What @Radioguy7268 said ++Well that seals the deal. 1/4 wave it is! Thanks everyone for chiming in! Quote
JohnE Posted February 12, 2021 Report Posted February 12, 2021 I will second Radioguy SteveC7010 1 Quote
n4gix Posted February 14, 2021 Report Posted February 14, 2021 I will second Radioguy That would make you the third, John. I am the fourth! In my professional career owning a GE Service Station, we only used 1/4 wavelength 'stingers' for both VHF and UHF roof-mouned antennas. Extreme 1 Quote
gortex2 Posted February 14, 2021 Report Posted February 14, 2021 I would use a simple black 1/4 wave for UHF. its 6" and will blend in. It will work night and day better than the phantom or stealth antenna n4gix 1 Quote
railfandanny Posted February 20, 2021 Report Posted February 20, 2021 I've punched a hole in my truck roof long ago. (It's tall enough that my wife can't see it) I'm currently running a Laird 1/4 wave but was considering the Laird 5/8 wave. I'm guessing the transmit performance will improve. Can I expect any better reception? reception? Quote
kidphc Posted February 20, 2021 Report Posted February 20, 2021 I've punched a hole in my truck roof long ago. (It's tall enough that my wife can't see it) I'm currently running a Laird 1/4 wave but was considering the Laird 5/8 wave. I'm guessing the transmit performance will improve. Can I expect any better reception? reception?Went from a 1/4 magnet to 5/8 drill nmo. Yes, you will get improved transmit. You may be shocked at the reception difference as well. Just keep loading coils and such in unobstructed locations. That alone then make a huge difference. Edited: plus you get the join our club. Where your antenna starts making music as it walks things. Quote
kidphc Posted February 20, 2021 Report Posted February 20, 2021 Went from a 1/4 magnet to 5/8 drill nmo. Yes, you will get improved transmit. You may be shocked at the reception difference as well. Just keep loading coils and such in unobstructed locations. That alone then make a huge difference. Edited: plus you get the join our club. Where your antenna starts making music as it walks things. For those that don't know..... From Reddit. A song from an antenna: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.