Jump to content

Dual watch with HAM?


PartsMan

Recommended Posts

I have a gm-30 with dual watch on order that should be here tomorrow.

I was thinking. It is able to scan some ham frequencies.

If my friend who is a ham can listen to gmrs frequencies

is there any reason we cannot communicate using two different frequencies?

I legally transmit gmrs and he listens.

He legally transmits on ham and I listen.

Link to comment
Share on other sites

We do that all the time in the Ham world when we speak to people is some other countries.  US amateurs may not be licensed to transmit on frequencies other nations can, and vice versa.  So, we transmit on a frequency we can legally use, announce what nation we are calling and what frequency we are listening to (a frequency they are licensed to transmit on).

I would do the same thing on GMRS.  For example "This is WRBY328 calling N1BED, listening on 446 MHz."

Link to comment
Share on other sites

2 minutes ago, BoxCar said:

The only Part 97 transmissions allowed with no identified receiving station are CW and test messages.

 

I've never done it with GMRS, but if we use the example I noted, could we not do it that way since we are identifying who we are talking to and what frequencies are in use?

I genuinely don't know.  I haven't really looked into it.

 

Link to comment
Share on other sites

4 minutes ago, marcspaz said:

 

I've never done it with GMRS, but if we use the example I noted, could we not do it that way since we are identifying who we are talking to and what frequencies are in use?

I genuinely don't know.  I haven't really looked into it.

 

IIRC, international traffic is specifically mentioned in the rules as being permitted but there is no mention of domestic traffic between services. I have a feeling the FCC would frown on it and the ham is subject to contact by a volunteer monitor about questionable operation.

Link to comment
Share on other sites

15 minutes ago, marcspaz said:

We do that all the time in the Ham world when we speak to people is some other countries.  US amateurs may not be licensed to transmit on frequencies other nations can, and vice versa.  So, we transmit on a frequency we can legally use, announce what nation we are calling and what frequency we are listening to (a frequency they are licensed to transmit on).

I would do the same thing on GMRS.  For example "This is WRBY328 calling N1BED, listening on 446 MHz."

This is different, as its still the same "service".

Link to comment
Share on other sites

43 minutes ago, PartsMan said:

If my friend who is a ham can listen to gmrs frequencies

is there any reason we cannot communicate using two different frequencies?

I legally transmit gmrs and he listens.

He legally transmits on ham and I listen.

I think this falls under the Common Law rule:

Quote

How do they know?!?

I once tried an experiment where I transmitted on 2 meters and the responding party transmitted on MURS!

Sounds like fun to ME!

Link to comment
Share on other sites

Well, part of the reason why I think it may be allowed (would still seek clarification from FCC) is because the rules say that one-way communications is prohibited except for limited exceptions, and then they list exceptions of which this case type is not listed.  That would mean its prohibited.  The loophole could be, its not one-way communications. It's two-way communications.

That said, the enforcement division of FCC may not agree that two-way communications across services is legally considered two-way communications.

Link to comment
Share on other sites

(I'm cutting out all the subpoints that are not relevant.)
 
§ 95.1733 Prohibited GMRS uses.

(a) In addition to the prohibited uses outlined in § 95.333 of this chapter, GMRS stations must not communicate:

...

(9) Messages (except emergency messages) to any station in the Amateur Radio Service, to any unauthorized station, or to any foreign station;

 

So I think the answer is, 'No, you cannot do that'.

Link to comment
Share on other sites

2 hours ago, axorlov said:

In addition to that,  stations in Amateur Service are only allowed to communicate with stations in Amateur Service, with very few exceptions (97.111); one way transmissions are specifically prohibited, with very few exceptions (97.111b and 97.113b).

Whatever other rule might prohibit the communication cited in the OP’s example, it is not a “one-way” communication. 

Link to comment
Share on other sites

20 minutes ago, MichaelLAX said:

it is not a “one-way” communication

FCC added it to cover: "Cool, but let's pretend I'm not communicating with the other service, I'm just blabbering out loud. And the other party too. Not a two-way, no no no. We are in a different services, sheesh!". I would guess whoever worded that rule first time had an experience.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.