PartsMan Posted January 6, 2022 Report Posted January 6, 2022 I have a gm-30 with dual watch on order that should be here tomorrow. I was thinking. It is able to scan some ham frequencies. If my friend who is a ham can listen to gmrs frequencies is there any reason we cannot communicate using two different frequencies? I legally transmit gmrs and he listens. He legally transmits on ham and I listen. Quote
BoxCar Posted January 6, 2022 Report Posted January 6, 2022 The only Part 97 transmissions allowed with no identified receiving station are CW and test messages. Quote
marcspaz Posted January 6, 2022 Report Posted January 6, 2022 We do that all the time in the Ham world when we speak to people is some other countries. US amateurs may not be licensed to transmit on frequencies other nations can, and vice versa. So, we transmit on a frequency we can legally use, announce what nation we are calling and what frequency we are listening to (a frequency they are licensed to transmit on). I would do the same thing on GMRS. For example "This is WRBY328 calling N1BED, listening on 446 MHz." Quote
marcspaz Posted January 6, 2022 Report Posted January 6, 2022 2 minutes ago, BoxCar said: The only Part 97 transmissions allowed with no identified receiving station are CW and test messages. I've never done it with GMRS, but if we use the example I noted, could we not do it that way since we are identifying who we are talking to and what frequencies are in use? I genuinely don't know. I haven't really looked into it. Quote
BoxCar Posted January 6, 2022 Report Posted January 6, 2022 4 minutes ago, marcspaz said: I've never done it with GMRS, but if we use the example I noted, could we not do it that way since we are identifying who we are talking to and what frequencies are in use? I genuinely don't know. I haven't really looked into it. IIRC, international traffic is specifically mentioned in the rules as being permitted but there is no mention of domestic traffic between services. I have a feeling the FCC would frown on it and the ham is subject to contact by a volunteer monitor about questionable operation. marcspaz 1 Quote
PartsMan Posted January 6, 2022 Author Report Posted January 6, 2022 So we are talking a serious gray area. Possibly not quite legal. Quote
tweiss3 Posted January 6, 2022 Report Posted January 6, 2022 15 minutes ago, marcspaz said: We do that all the time in the Ham world when we speak to people is some other countries. US amateurs may not be licensed to transmit on frequencies other nations can, and vice versa. So, we transmit on a frequency we can legally use, announce what nation we are calling and what frequency we are listening to (a frequency they are licensed to transmit on). I would do the same thing on GMRS. For example "This is WRBY328 calling N1BED, listening on 446 MHz." This is different, as its still the same "service". marcspaz 1 Quote
marcspaz Posted January 6, 2022 Report Posted January 6, 2022 @PartsMan BoxCar and tweiss3 bring up some good points. It may be worth sending an email to the FCC requesting clarification. The division called Wireless Telecommunications has a customer support email addresses and phone numbers. https://www.fcc.gov/wireless-telecommunications Quote
AdmiralCochrane Posted January 6, 2022 Report Posted January 6, 2022 Not the way English Common Law works. Something has to be prohibited. If its not specifically mentioned, its allowed. Grey areas come about when the prohibiting language is unclear, not when it is omitted. Quote
MichaelLAX Posted January 6, 2022 Report Posted January 6, 2022 43 minutes ago, PartsMan said: If my friend who is a ham can listen to gmrs frequencies is there any reason we cannot communicate using two different frequencies? I legally transmit gmrs and he listens. He legally transmits on ham and I listen. I think this falls under the Common Law rule: Quote How do they know?!? I once tried an experiment where I transmitted on 2 meters and the responding party transmitted on MURS! Sounds like fun to ME! Quote
marcspaz Posted January 6, 2022 Report Posted January 6, 2022 Well, part of the reason why I think it may be allowed (would still seek clarification from FCC) is because the rules say that one-way communications is prohibited except for limited exceptions, and then they list exceptions of which this case type is not listed. That would mean its prohibited. The loophole could be, its not one-way communications. It's two-way communications. That said, the enforcement division of FCC may not agree that two-way communications across services is legally considered two-way communications. Quote
wrci350 Posted January 6, 2022 Report Posted January 6, 2022 (I'm cutting out all the subpoints that are not relevant.) § 95.1733 Prohibited GMRS uses. (a) In addition to the prohibited uses outlined in § 95.333 of this chapter, GMRS stations must not communicate: ... (9) Messages (except emergency messages) to any station in the Amateur Radio Service, to any unauthorized station, or to any foreign station; So I think the answer is, 'No, you cannot do that'. PartsMan, SOBX and marcspaz 3 Quote
axorlov Posted January 6, 2022 Report Posted January 6, 2022 In addition to that, stations in Amateur Service are only allowed to communicate with stations in Amateur Service, with very few exceptions (97.111); one way transmissions are specifically prohibited, with very few exceptions (97.111b and 97.113b). Quote
PartsMan Posted January 6, 2022 Author Report Posted January 6, 2022 Sounds like a no go. The whole reason I asked was because I had a feeling the FCC would frown on it. I guess the hardware would do it in an emergency. Quote
marcspaz Posted January 6, 2022 Report Posted January 6, 2022 12 minutes ago, PartsMan said: I guess the hardware would do it in an emergency. Thankfully the rule makers were smart enough to say (paraphrasing) "in an emergency, forget everything you just read." LOL PartsMan 1 Quote
MichaelLAX Posted January 6, 2022 Report Posted January 6, 2022 1 hour ago, marcspaz said: Thankfully the rule makers were smart enough to say (paraphrasing) "in an emergency, forget everything you just read." LOL I believe that goes for “testing” too. Quote
MichaelLAX Posted January 6, 2022 Report Posted January 6, 2022 2 hours ago, axorlov said: In addition to that, stations in Amateur Service are only allowed to communicate with stations in Amateur Service, with very few exceptions (97.111); one way transmissions are specifically prohibited, with very few exceptions (97.111b and 97.113b). Whatever other rule might prohibit the communication cited in the OP’s example, it is not a “one-way” communication. Quote
axorlov Posted January 7, 2022 Report Posted January 7, 2022 20 minutes ago, MichaelLAX said: it is not a “one-way” communication FCC added it to cover: "Cool, but let's pretend I'm not communicating with the other service, I'm just blabbering out loud. And the other party too. Not a two-way, no no no. We are in a different services, sheesh!". I would guess whoever worded that rule first time had an experience. MichaelLAX 1 Quote
MichaelLAX Posted January 7, 2022 Report Posted January 7, 2022 It's like sex: if you have a one-way conversation; you'll go blind! marcspaz 1 Quote
n4gix Posted January 8, 2022 Report Posted January 8, 2022 On 1/6/2022 at 8:04 PM, MichaelLAX said: It's like sex: if you have a one-way conversation; you'll go blind! I've always heard that you'd get hair on the palms of your hand... MichaelLAX 1 Quote
Coffeemaker Posted January 15, 2022 Report Posted January 15, 2022 It would sure sound prohibited, but stupidly so. I suppose, in an emergency, after tornadoes, etc. You might well get by with its listening on a shortwave receiver and transmitting on GMRS. Prolly hard to make that hook-up. Quote
MichaelLAX Posted January 15, 2022 Report Posted January 15, 2022 A radio buddy with both GMRS and Tech Ham, is getting the Quad Band TYT mobile radio that includes 10 Meters and I am going to try to figure out a way we can cross communicate on 10 Meters so he can learn some Morse Code! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.