Leaderboard

What a terrible day to know how to read

https://us.yahoo.com/news/search-underway-70-old-california-170137546.html

Not once have I struggled with trying to get some port recognition while using Chirp and a Mac. I can't say that for windows and whatever software is supplied by the radio manufacturer. Therefore I like Chirp. To each their own...

His mind is made up and cannot be changed by facts. And like a number of folks here, he lives to berate. Personally, I like Chirp. It's way better than any of the free software that came with any of my radios. And being free and all, it's considerably cheaper than RT Systems.

Adam, We all make mistakes. Don’t be so hard on yourself.

You do you. Its OK.

Under § 95.1787 GMRS additional requirements. It’s requirement a(4): (a) Digital data transmissions. GMRS hand-held portable units that have the capability to transmit digital data must be designed to meet the following requirements. (1) Digital data transmissions may contain location information, or requesting location information from one or more other GMRS or FRS units, or containing a brief text message to another specific GMRS or FRS unit. Digital data transmissions may be initiated by a manual action of the operator or on an automatic or periodic basis, and a GMRS unit receiving an interrogation request may automatically respond with its location. (2) Digital data transmissions must not exceed one second in duration. (3) Digital data transmissions must not be sent more frequently than one digital data transmission within a thirty-second period, except that a GMRS unit may automatically respond to more than one interrogation request received within a thirty-second period. (4) The antenna must be a non-removable integral part of the GMRS unit. (5) GMRS units must not be capable of transmitting digital data on the 467 MHz main channels.

You sir would be an honored guest of The NotARubicon repeater and afforded all perks and privileges therein and whatnot.

As 255 mentioned... This will transmit 141.3 and only listen for signals with 141.3. If you want to hear everything and only transmit the tone to open the repeater, do this...

set it for TSQL first, then it will ask for the tone. If you do it that way, it sets the RX / DX all at once. You overthink it, try to add it something else, then it messes it up.

I bet you already do! Part of what makes Chirp useful, but also sometimes difficult to understand, is that it has to store information for hundreds of different radios in a kind of least-common denominator database. Once you understand that you can program all of those radios.

But its free, and works. Taking a bit to learn it, like anything else you have to do to get by in life will not kill you.

No, It will be worse, they can also vote.

Is there a repeater involved? Are they using the same tones?

Cross.

I can say this got me at first too, but I set all my repeater sets to tone, and today I did get my first hit once I was within range. It worked well, they said I came through "full quiet" or something like that where my voice was clear and no background noise. I have not went into the radio to review what it looks like in there, but I set the chirp just like those pics above show and it works like a charm. I can hear others talk on that repeater from my house, but my handheld doesn't have enough juice to reach out.

Correct. If you want both, you'll want to use TSQL

Yet another on the ignore list.

What is your source for your "beginning to get tons of them [complaints]" statement? and... no, they will not act soon - based on the last 10 years of the FCC's enforcement actions, you are wrong. No, he won't. Nobody will, and statistically speaking, in the last 10 years, nobody has. Stop making up and spreading fairy-tales and lies, it makes you look uniformed and ignorant - and now everyone is laughing at you.

I think im going to buy this antenna: HYS Long Range Pretuned Low-Profile UHF 17.7inchs Whip NMO 462-467Mhz Antenna for Midland Motorola GMRS Cobra Icom 460-470Mhz Two Way Mobile Radio I’m not sure what coax cable to buy. The listing says it connects to a magnetic base that is sold separately. I don’t want a magnetic base Im just going to drill a hole in my cab and connect it that way. Does anyone know what I should buy? Preferably a cable that has the connections already in place. Also, does this need to be grounded to the truck with a separate ground wire? Thanks If it matters, I plan to use this with a radioddity DB40G and sometimes with a baofeng uv5g or uv9g

I can't believe this, how could he have done this? Choosing a very overpriced limit function GMRS radio over his high-quality Kenwood radio. This overpriced radio comes from a company that also sells a 128-channel FRS radio. So you have to wonder. Why my friend? Hello Hello Hello

I have several rifles that use Magpul 5.56 magazines. How dare the 9mm magazines do not work on those rifles, therefore, the 5.56 is not valid. You use what works for what you need.

When people are talking locally, they still use a handle, but in noisy DX pile-ups, it's easier to hear a number. Also, there are some really stupid rules, like you are not allowed to talk to people in other countries and you're not allowed to have a conversation for more than 5 minutes, then there is a mandatory 1 minute break, etc. So people have a tendency to use a number instead of a handle to make it harder to ID who's talking. Was it 401 in New Hampshire or 401 in New Mexico kind of mindset.

Most users can’t delete your own posts. Maybe premium users can or maybe only those who have risen to a certain level. I can delete my own posts, but I don’t know why.

Have you tried to manually install drivers for the PL2303 chip? Google how to do it, there are instructions on how to install the Prolific chip drivers.

Reading through the rules again I am wondering whatever happend to Midlands request for a waver to use digital on GMRS mobile radios and increase power for such transmissions? I'm guessing it's part of the slow moving FCC approval process.

Thank you! I’m out of reactions for the day so giving all my thanks verbally lol Seems like we could be allowed to have a few more reactions at our disposal…

It will make sense when you have the antenna and that cable in your hand, You unscrew the big part from the cable fitting and put the little part of the fitting up through the hole in the roof and screw the big part back on, that holds it to the roof. Then the antenna will screw onto that big part.

If you do decide to go the repeater route, or may use a repeater in the future, you want an all-copper feedline to reduce the likelihood of "duplex grunge" aka PIM distortion (passive intermod distortion). Typically you'd want something super high end like andrew heliax but there are some good all-copper coax by Messi and Paolomi. You can order custom cables from them and you probably want ultraflex 10 (ultraflex 10 and broad pro c 50 are the only ALL copper cables). If you go with them get the UHF Male PL259 EVO connectors. If you can get the antenna or repeater in an n-type connector, get the appropriate amount of n-type ends on your cable as well. RT97S for instance only comes with a UHF connector not n-type. https://messi.it/Calc/ordine.aspx?l=EN They are in Italy but shipping speed and price is reasonable. You can also find their cables pre-made in common lengths from gigaparts and buytwowayradios. Just make sure it's ultraflex 10 or broad pro c 50. Whatever route you choose, a base station unit or repeater, just getting the antenna out onto the roof will make a big difference.

I know I'm not who you are asking, but I have a DB20G and it's a very nice radio for the price. I am partial to Ed Fong DBJ antennas and I usually order one from him with an N-type connector on the antenna, and then get a custom Messi and Paolomi UHF to N-type cable as n-type has better water resistance. And/OR you can seal up the connection with silicone tape: https://www.amazon.com/Proxicast-Pro-Grade-Weatherproof-Self-Fusing-Electrical/dp/B00K5GW67O/

If OP needs to reach his wife, she would only hear a base unit if she is right there in the room containing the radio. With a repeater she can carry a small HT while she move about the house or steps outside. A repeater would also give a little more placement flexibility vs needing the radio in a specific location inside the house, and potentially less antenna feedline meaning less loss. Personally I would probably still use a repeater. OP, it matters most what type of terrain is between your home and the lake and how clear the line of sight is.

@dosw thanks, I usually give that link but had a brain fart this time.

Of course all this is documented..... https://chirpmyradio.com/projects/chirp/wiki/MemoryEditorColumns

...relevance? If I posted about every hiker that went missing in Southern Utah this forum would have very little radio content left. I mean, it's awful, but it's not exactly GMRS relevant near as I can tell

I hope so, too. I wonder if he has any radio gear. If so, knowing that would be helpful so searchers and the public in that area could be encouraged to turn on their radios and monitor for possible distress calls from this gentleman.

you know it never rains

Take a look at this it will help you understand the Chirp settings. https://wiki.radioreference.com/images/0/0a/CHIRP_tone_programming.pdf

FWIW, I thought your joke was humorous.

The latest (last) version of the software is CE27 for Windows. It runs just fine on Windows 10 64bit (my programming PC). I got my programming cable from BlueMax49ers for $20 and it worked fine. There are a few tricks setting up the repeater such as how to get into maintenance mode to change the CWID and how to run wide band, do a search on these forums and you should get a pretty good idea on what to do.

"Today is today and yesterday was today yesterday. Tomorrow will be today tomorrow. So, live today so the future today will be as the past today, as it is tomorrow." My head hurts now.

could you be a little more vague?

Lots of choices in this area. Keep in mind though the radio is only part of the purchase - You need an external antenna and mount which can cost as much (or more) than the radio.

You’re right; it’s absolutely wrong and probably written by someone who has never visited one of the more rural states. One of the civic duties our ham radio club volunteers to do each year is provide communications for a 127 mile bicycle race. We can hit our repeater fine for almost all of the course, but cell service is only available for a small portion. The cell companies have little or no motivation to build cell towers where the density of humans is single digits per square mile, even though roads pass through.

Wouxun KG-XS20G. It may be a little more elaborate to set up than the Wouxun KG905G, but you can review the manual online and see if it will fit your needs. And it's $199, so it fits under your $200 threshold. It's a 20w radio. I have an Retevis RA87 40w radio. It's not what I would call simple, but only because the manual is written in a version of English that doesn't exist outside of China. Once you configure it with CHIRP, it's all set and good to go. And you can get it for under $160 if you do a little searching. You will still need an antenna and antenna mount. Staying under $200 with a decent antenna may be a bit of a challenge. There's also the Midland MXT275, which comes with an antenna, though a tiny one. That bundle is $169 on Amazon. It's a 15w radio. But here's where it may fall short of your needs: Yes, it can do repeaters. However, you get only one repeater per frequency. You get one repeater on channel 15R, one on 16R, and so on. So if you happen to have two repeaters you like to hit on 462.7000, you'll have to pick one and go with it. To use the other one, you'll need to reconfigure the radio's tone on that channel. However, the radio is otherwise extremely simple to use, and works quite well. It was my primary mobile radio for a couple of years.

Not that transmit data.. C'mon, keep up man.

I'm not sure what your overly-pedantic point is? are you saying that the FCC IDs and certifications are meaningless and do not matter? Please clarify so we all can understand if we should ignore the FCC IDs and certifications or not.

So you have to defeat a little bit of glue.. I see what they did there The whole nod to the customers' desire to do more than what the FCC allows is nothing new. Mars Mods are often, "hey just snip this jumper wire that for some arbitrary reason is just readily accessible to snip".... Since the CB radio times..

Probably watched someone on Youtube remove one..Thusly voiding the warranty.

"illegal"? No.. Not complaint with FCCs regulations? Maybe.. But, the FCCs certified the radio sooooo.. Does the FCCs care? According to the FCCs' lack of enforcement, No Do any normal people care? No