H8SPVMT Posted August 31, 2023 Report Share Posted August 31, 2023 The only setup I have for a real mobile is a MXT-400 Midland with the MXTA26 antenna. I made a mount for the antenna to set on and it all seems to work pretty good so far. I certainly don't understand all the jargon used around the components and just wanted a simple radio I could depend on to get the job done. I purchased a couple hand held years ago that I even forgot I had. They probably would work just fine for on the trail rides just as well. It was a struggle to finally come up with a secure mount in my 2015 Jeep but I managed to get'er done on the top of the dashboard and is not a knee-knocker. As the time goes by, I have read a lot here and many discussions have made me want to search the radio functions I have that are not necessarily printed in the Owner Manual. It has paid off for me. Quote Link to comment Share on other sites More sharing options...
WRUE951 Posted August 31, 2023 Report Share Posted August 31, 2023 17 hours ago, nokones said: In case you want to pursue the Motorola Astro 25 Mobile option, I have an extra 44 watt R2 Range (450-512 MHz) transceiver I appreciate the offer but for right now i got a good deal on some Hytera radios and going to give them a shot.. Thanks.. Quote Link to comment Share on other sites More sharing options...
Over2U Posted September 1, 2023 Report Share Posted September 1, 2023 On 8/30/2023 at 9:00 AM, Sshannon said: On 8/30/2023 at 9:07 AM, marcspaz said: I wouldn't tell anyone that they are not capable of accomplishing any of this... Yes, you can tell me that, and I will know you are way right! marcspaz 1 Quote Link to comment Share on other sites More sharing options...
gortex2 Posted September 1, 2023 Report Share Posted September 1, 2023 For 90% of my GMRS use I run the Midland 275 in all my Jeeps with a NMO 1/4 wave antenna. They are mostly used on trails with other jeeps and work well. In my work truck I run multiple APX8500's so will use one of them when needed. All are used on my repeaters and work well. Hoppyjr 1 Quote Link to comment Share on other sites More sharing options...
mitzvah Posted September 5, 2023 Report Share Posted September 5, 2023 It doesn't matter much cuss there is no one out there. GMRS is just like CB for me. I only made ONE (1) up/down contact so far. Quote Link to comment Share on other sites More sharing options...
SteveShannon Posted September 5, 2023 Report Share Posted September 5, 2023 7 hours ago, mitzvah said: It doesn't matter much cuss there is no one out there. GMRS is just like CB for me. I only made ONE (1) up/down contact so far. With ham radio you BYOR “bring your own radio” and there will be other people to talk to if that’s what you want. With GMRS you have to BYOOP “bring your own other people.” That’s not to say that you’ll never talk to complete strangers in distant and exotic neighborhoods not so far away, but it’s not really why GMRS exists. WRHS218, KBSherwood, marcspaz and 4 others 7 Quote Link to comment Share on other sites More sharing options...
WRXW945 Posted September 5, 2023 Report Share Posted September 5, 2023 On 8/30/2023 at 5:41 PM, labreja said: I run a Kenwood TK-880-1 ver2. with a Midland MXTA26. Because the truck is aluminum, I attached a magnet behind the third brake light. That is how I got the mag mount to stay. Non of the radios or the mic holders are screwed in. They are all mounted using double face tape. What type of stake pocket mounts are those? I'd really like to put my MTXA26 on one. Quote Link to comment Share on other sites More sharing options...
marcspaz Posted September 5, 2023 Report Share Posted September 5, 2023 7 hours ago, mitzvah said: It doesn't matter much cuss there is no one out there. GMRS is just like CB for me. I only made ONE (1) up/down contact so far. As Steve mentioned, GMRS is a "Bring Your Own Contacts" type of service. Very utilitarian. If someone is looking for people to chat with on the radio, I always recommend getting your Amateur Radio license. Particularly a General class or Extra class. Then, there are millions of potential people to chat with, both on local Ham repeaters and Nation-wide, as well as globally on HF. SteveShannon, WRXB215, SteveC7010 and 2 others 5 Quote Link to comment Share on other sites More sharing options...
OffRoaderX Posted September 5, 2023 Report Share Posted September 5, 2023 12 hours ago, mitzvah said: It doesn't matter much cuss there is no one out there. GMRS is just like CB for me. I only made ONE (1) up/down contact so far. As Steve & @marcspaz mentioned, GMRS is a "Bring Your Own Contacts" type of service. Very utilitarian. If someone is looking for strangers to chat with, I always recommend using the Grindr app. SteveShannon, WRXW945, gortex2 and 5 others 1 6 1 Quote Link to comment Share on other sites More sharing options...
SteveShannon Posted September 5, 2023 Report Share Posted September 5, 2023 1 hour ago, OffRoaderX said: As Steve & @marcspaz mentioned, GMRS is a "Bring Your Own Contacts" type of service. Very utilitarian. If someone is looking for strangers to chat with, I always recommend using the Grindr app. So are you saying ham radio is like Grindr for people who just want to talk?? Blaise, H8SPVMT and marcspaz 2 2 Quote Link to comment Share on other sites More sharing options...
mitzvah Posted September 8, 2023 Report Share Posted September 8, 2023 On 9/5/2023 at 9:29 AM, OffRoaderX said: As Steve & @marcspaz mentioned, GMRS is a "Bring Your Own Contacts" type of service. Very utilitarian. If someone is looking for strangers to chat with, I always recommend using the Grindr app. Hey OffRoaderX My only up and down contact was with you! Quote Link to comment Share on other sites More sharing options...
mitzvah Posted September 8, 2023 Report Share Posted September 8, 2023 Hey, OffRoaderX My only up-and-down contact was with you! Quote Link to comment Share on other sites More sharing options...
FreqieRadio Posted September 8, 2023 Report Share Posted September 8, 2023 On 8/29/2023 at 9:40 PM, WRKC935 said: My personal setup is a bit overkill for anyone new to radio. I run an APX8500 and a Comet 2X4 antenna. So that being said. A good starting configuration for the folks just getting into GMRS is gonna be an NMO mag mount with a unity gain whip. That is by far the least expensive option and will still give reasonable performance to get you on the air and talking on the local repeaters and some simplex as well. One of the things that people fail to understand, especially with mobile setups is the amount of available gain in mobile antenna's from unity gain to the highest numbers available is only about a 9 dB difference. Now while that sounds like a ton of gain, when you are looking at signal levels in a radio and what is receivable and whats solid copy all falls into a range of about 6 to 9dB. If your squelch is set to -118dBm which is pretty typical, could be as high as -110 dBm but that's pretty tight. When you are at -118dBm you are gonna be about 25% noise. But if you open the squelch up more and go down to -120dBm signal level you are now at 50% plus noise with your signal. So down at that level it matters. That being said. If you increase from -120 to -110, you are typically going to be perfect copy, and by the time you are at -107 you are solid. Any increase from there is NOT going to have any effect on your signal. You will sound the same from -105 to -50dBm. The reception just doesn't change. Point is this. If you have a local repeater that has a signal level of -100dBm in all the area's that you travel, putting a 9 dB gain antenna gets you NOTHING for increased signal. And UHF is finicky. Hills and valleys will block the signal no matter the antenna gain. I have two radios in my truck. One is an XPR4550 with a unity gain whip. The other is the 8500 with the 2X4 Comet. When I start loosing the repeater on either radio due to topography, both radios suffer equally. The signal is just blocked and there is nothing that can be done about that. And there are places that I can't talk on my repeater that are less than 10 miles from it, but there are places I can talk on my repeater that are 60 miles from it. So bear that in mind when your signal fades out and comes back and you feel you would be doing better to go drop $100 on a wiz-bang high gain mobile and antenna and mount thinking it's gonna cure all your problems. Oh my. I hope you have more than Gmrs going on with those radios. Quote Link to comment Share on other sites More sharing options...
Borage257 Posted September 8, 2023 Report Share Posted September 8, 2023 Running DB20G in an ammocan build. In its base station use, it feeds a tram1480. In its mobile mode, a UT-72G. looking to up grade to something better, not sure what tho. would like to get some Hytera UHF HTs Quote Link to comment Share on other sites More sharing options...
labreja Posted September 10, 2023 Report Share Posted September 10, 2023 WRXW945 The one on the left, I made. The one on the right is a Breedlove mount. The Breedlove mount is much better than my home made one. They are well worth the money. WRXW945 1 Quote Link to comment Share on other sites More sharing options...
Sab02r Posted September 21, 2023 Report Share Posted September 21, 2023 For the OP, Radioditty DB25-G with a Midland MXTA26 antenna and a Breedlove #940 angled stake pocket NMO mount works great. The DB25-G has a couple of peculiarities related to scanning, but as a simplex or duplex radio it works great. Quote Link to comment Share on other sites More sharing options...
WRYN854 Posted September 25, 2023 Report Share Posted September 25, 2023 I am running a Radioddity DB-20G using a cup holder mount in my old Chevy Tahoe with a Nagoya UT-72G antenna. So far I am getting good reception and able to hit my local repeaters. AdmiralCochrane and WRYS709 2 Quote Link to comment Share on other sites More sharing options...
WRYS709 Posted September 25, 2023 Report Share Posted September 25, 2023 2 hours ago, WRYN854 said: I am running a Radioddity DB-20G using a cup holder mount... Which cup holder mount did you get? Quote Link to comment Share on other sites More sharing options...
marcspaz Posted September 25, 2023 Report Share Posted September 25, 2023 I was going to ask the same thing. That's a nice setup. I'd like to use one in my Ram. Quote Link to comment Share on other sites More sharing options...
WRYN854 Posted September 27, 2023 Report Share Posted September 27, 2023 https://www.amazon.com/LycoGear-Pattern-compatible-Bracketron-Universal/dp/B07YBKWYMM/ref=sr_1_1_sspa?crid=3UMBA78FDIB17&keywords=mobile+radio+cup+holder+mount&qid=1695813855&sprefix=Mobile+radio+cu%2Caps%2C114&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1 WRXW945 and marcspaz 1 1 Quote Link to comment Share on other sites More sharing options...
WRYS709 Posted September 27, 2023 Report Share Posted September 27, 2023 2 hours ago, WRYN854 said: https://www.amazon.com/LycoGear-Pattern-compatible-Bracketron-Universal/dp/B07YBKWYMM/ref=sr_1_1_sspa?crid=3UMBA78FDIB17&keywords=mobile+radio+cup+holder+mount&qid=1695813855&sprefix=Mobile+radio+cu%2Caps%2C114&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1 Thank you! That's about $30; here is a less expensive alternative: fe2o3 1 Quote Link to comment Share on other sites More sharing options...
WRWS738 Posted October 4, 2023 Report Share Posted October 4, 2023 I am just assembling my equipment for my mobile installation in my 2018 Chevy Equinox. Hopefully I will get it installed next week. Here is what I am using. I caught a 20% off coupon for a Midland MTX500 radio and a Midland MXTA26 6dB Gain antenna. I plan a hood mount using a Comet RS-720-NMO Medium Duty Antenna Lip Mount. The issue to be worked out is how/where the radio gets installed as I a looking for a more out of sight location rather than a console or under dash install. Suggestions for installation are welcome. Quote Link to comment Share on other sites More sharing options...
WRWS738 Posted October 4, 2023 Report Share Posted October 4, 2023 On 8/30/2023 at 12:19 PM, WRUZ229 said: I’m running the Midland MTX575 with the Midland 3db “Ghost” antenna mounted in the rear roof of my 4Runner. Works great. I’d absolutely love to score a Motorola 5000 as I’ve found the brand to perform extremely well in my past career. I considered a Midland Ghost antenna for my hood mount. Seems less conspicuous but wasn't sure how it would function. Thoughts? Also a question as to where you installed your MXT575. I'm thinking an out of sight location ? Thanks for any comments/suggestions.. Quote Link to comment Share on other sites More sharing options...
OffRoaderX Posted October 4, 2023 Report Share Posted October 4, 2023 37 minutes ago, WRWS738 said: I considered a Midland Ghost antenna for my hood mount. Seems less conspicuous but wasn't sure how it would function. In actual testing, compared to the larger MXTA26, the ghost antenna performs VERY well.. Surprisingly well... IF you can mount it in a good location. If any part of the ghost antenna is being blocked by parts of the truck, it works terribly.. Basically, if you can mount it on the center of the roof, its great but anywhere else, not so much. Hoppyjr, WRWS738, Tico and 2 others 4 1 Quote Link to comment Share on other sites More sharing options...
Hoppyjr Posted October 4, 2023 Report Share Posted October 4, 2023 I considered a Midland Ghost antenna for my hood mount. Seems less conspicuous but wasn't sure how it would function. Thoughts? Also a question as to where you installed your MXT575. I'm thinking an out of sight location ? Thanks for any comments/suggestions.. My MTX575 is mounted under the drivers seat of my 4Runner. The Midland “Ghost” is mounted in the roof, at rear. Works excellent. We used an extension to give the Midland mic a plug-in on the dash. Under the passenger seat is the Wilson WeBoost, with its matching antenna across from the Midland, in the roof. I picked up a Motorola 5000 series mobile (40w) with the plan to install it, but I’m not sure where I’d mount the head, or if I have time to mess with it right now. WRWS738 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.