Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 07/30/24 in all areas

  1. It has been universally agreed to by some, and decreed by the Queen of all that is GMRS that channel 19 shall be the unofficial Official Road Channel for GMRS. So it is written, so shall it be done... Bear in mind that "some people" will vehemently disagree and argue to the death against this, but just remember that they are wrong.
    4 points
  2. It could be a battery charger, one of those wall warts, a computer power supply with problems, fluorescent lights, LED lights, almost anything. Unplug things until it stops. Such noise is not uncommon.
    3 points
  3. Sorry but my fathers renewal in January still lists the restriction. I also just did a searcdh for July only licences and the last one issued in NY was on July 25 and shows it on the license....So yes its still in effect as far as licenses are conerned. For years my father wanted to use 650 which is how we ended up on 675 for decades. Special Conditions Effective 2/16/99 the GMRS rules have been amended and you may operate on any of the primary or interstitial channels shown in section 95.1763. Exception: Licensees who operate North of Line A and East of Line C may not operate on channels 462.650 MHZ, 467.650 MHZ, 462.700 MHZ and 467.700 MHZ unless your previous license authorized such operations.
    3 points
  4. Make a post saying which repeaters are bogus then click on the three dots in the upper right corner and choose Report.
    2 points
  5. This is just my thought: If you’d like to talk, be the one to start the conversation. Hit up your favorite local repeater and just say anything. Sometimes I’ll shout out my call sign with “listening” just to make sure I’m in range of a repeater. When it comes to traveling, any channel works. 15-22 are your high power channels, up to 50 watts, so, might be worth it (if you’re bored) to just put yourself out there. ”WSCL244, listening. WSCL244,” or something to that effect. You might get a response. You might not. It’s a toss up. GMRS was originally intended, to my understanding, to be a utility and talk with people you know are going to respond, such as a caravan road trip across the state, and you’re following other vehicles who are all on GMRS. Much safer to talk on radio than to text in the car… >.> Anyway, no specific channel. Talk wherever you want. If you hear a conversation that’s interesting that you want to join in on, just announce your call sign when there’s a free spot. If they invite you in, they’ll give you a hello. If not, just move on. It isn’t meant to be taken too seriously, though.
    2 points
  6. If someone reports them Rich takes care of them but if nobody reports them they might remain in place.
    2 points
  7. An old computer with a processor clock speed close to your receive frequency will cause havoc.
    2 points
  8. OffRoaderX

    Surecom Software?

    They don't sell the ground-plate with the SW102 anymore because it doesn't do any good. With that meter (most meters) you will never get an accurate reading of an HT antenna even with the ground plate. I recommend not wasting your time and not trying to overthink it.
    2 points
  9. Off road -> 16 On road-> 19 (by Queen decree) Those of us who live near or above “Line A” reserve the right to disregard His Majesty the Queen.
    2 points
  10. @RayP I see it now; I didn't notice the owner circle button (that needs to be enlarged or changed so the callsign is fully visible). I did reprogram one radio channel based on the bogus listing. I'll have to look for the last update by the real owners I guess. I'll help Ray out: @rdunajewski bogus listings: 9299 ... real is 9024, 9296 ... real is 2898 9295 ... real is 6541 and I think also 9297 and 9298
    1 point
  11. This topic is totally incorrect. 95.1749 reads exactly as it did in the NPRM and Federal Register in August 2017. Any idiot with half a brain can look at the current rules as posted today and the Federal Register in 2017 and they will see no change by the FCC The FCC did not have knee jerk reaction to all the "Sad Hams" lamenting the rules of the GMRS service and operators of said service. Nothing changed, Nobody cares.
    1 point
  12. Just be aware that FRS radios are set to Narrowband FM and most likely your GMRS radios are set to Wideband FM, so the FRS radios will have much diminished audio punch! You could change the settings on your GMRS radios (the FRS radios do not have that option by Rule) and the audio quality for all will be much improved! I liked the Pofung BF-T11s which used to be available on Amazon and eBay for about $25 per pair: 2 watts K-1 jack and even computer programmable. Fulfills all your other needs, too. I see that AliExpress now has them!
    1 point
  13. The BF-888s have been around for years. I picked up a pair about 6 years ago and gave them away. My thoughts, stay away.
    1 point
  14. SteveShannon

    Contacting FCC

    Are you certain you’re dialing all the digits? Dialing fewer would result in a dead line like you described.
    1 point
  15. Not uncommon with those radios, mine goes ape at some traffic lights.
    1 point
  16. UncleYoda

    Contacting FCC

    Hours are not the issue. Could be something local I guess (like the old all circuits are busy). Or they just don't want to hear from me. I tried again, an hour later, this time using the 1 (typically unnecessary), same result.
    1 point
  17. Good video. I always like his content. The problem he touches on is, the conflicting and contradictory rules combined with poor definitions and poor word choices. Until FCC updates the rules with very clear and specific language or a case makes it to the SCOTUS, there won't be a good answer.
    1 point
  18. Set Tone Mode to TSQL and it may help.
    1 point
  19. Ray, as you may have noticed before (a while back), the 725 repeater, formerly at 600, was listed twice, once under each frequency, for a time. That may explain part of it, if the 600 listing was later updated. As I know you know, that owner changes things so much it's hard to keep up with. I'm not sure on Hopkins, except it was listed as permission required for a while recently before going back to open. I got permission from the owner during that time and he didn't say anything like it was supposed to open. And I don't know if it's relevant to the problem you bring up here, but last time I got the list for SC, sorted by last update, there were multiple entries for some of the same repeaters. I hadn't noticed that before; I was expecting each one to be listed only by the last update..
    1 point
  20. Fixed....thanks.
    1 point
  21. I'm not sure either. For SAR I have some 450.xx and some 460.xx frequencies. We still had to send our last frequency to Canada last summer for coordination. I'm not sure what really is accurate or not but it takes forever to get part 90 LMR frequencies north of Line A.
    1 point
  22. Yeah, I remember when we opened up a “466” (as I recall it was a 486 processor running at 66 MHz) computer case and the security guy’s handheld went ape.
    1 point
  23. You can also use your hand held radio with a small yagi antenna to find and pin point sources of interference. The rubber duck antenna will get you close but the yagi will narrow the search down.
    1 point
  24. motion carries, i get this occasionally on my scanners. in the mornings it's accompanied by being able to pick up repeater output multiple states away in the morning and goes away by 8-0830 and returns in the evening. i bought an RF/EM meter to wand around and figure out where it was coming from and one of them was only happening when HVAC kicked on to run fans. another one still to be determined, it ends up being audible in other GMRS frequencies. if you have a hard time finding a meter that isn't overdoing it (some instruments are out there for thousands of dollars you don't need that) here's an old hacker trick: add "ghost hunting" to the search, since apparently "ghost hunters" follow EM/RF physics
    1 point
  25. Can you please cite the appropriate rule that states linking GMRS repeaters is prohibited? I am unable to find any such FCC rule that prohibits the linking/networking of GMRS repeaters, base and fixed stations.
    1 point
  26. muggz

    HT Stand for KG-935G+

    Thanks for your review and feedback; it's my shop and I'm happy you like the stands. I spend lots of time on each design for a snug-not-tight fit. If the mods are ok with me posting a link, here's a 10% off discount code for my shop, valid through 7 August 2024. https://blacklodgecreative.etsy.com?coupon=MYGMRS10 (mods sorry if this violates rule #1 and apologies if so) Cheers, Mike WRNQ661
    1 point
  27. Thank God there no restrictions for UHF freqs below 470 MHz with Mexico.
    1 point
  28. I understand the reasoning behind this -- to ensure that the operator doesn't transmit outside the specs -- but it would be preferrable if that were a burden placed on the operator without regard to the equipment. If one can get a toaster to play by the rules they should be good to go. Operator A: "Hey buddy, what radio are you on today?" Operator B: "A GE four slicer." Of course that would require a test which defeats the whole purpose of GMRS.
    1 point
  29. May want to look at these as well https://www.amazon.com/dp/B088GQMX45/ref=sspa_dk_detail_5?pd_rd_i=B088GQMX45&pd_rd_w=r4YEl&content-id=amzn1.sym.8c2f9165-8e93-42a1-8313-73d3809141a2&pf_rd_p=8c2f9165-8e93-42a1-8313-73d3809141a2&pf_rd_r=3C3KC236XPPDDN7V1KMN&pd_rd_wg=Qc0NA&pd_rd_r=b398c3c2-7b4b-4606-a036-c1f7ada2134b&s=car&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw&th=1
    1 point
  30. They say you don't have to test for a GMRS license... navigating the fcc website IS the test
    1 point
  31. No taxation without representation!
    1 point
  32. You people don't count.
    1 point
  33. As the esteemed gentleman from the California Central Coast ( @WRUU653 ) pointed out: I never contradict myself. Had you been paying attention you should understand that GMRS Channel 16 is for OFF ROAD as proven by the mathematical formula (4 X 4 = 16), and the OP is asking about the official HIGHWAY channel.. A highway is a road, and off-road is not a highway. Do better next time.
    1 point
  34. just a minor decorum note - just ham, not H.A.M. Tech license is super easy and General is worth an additional few minutes of study. May subjects and questions overlap on the tests if you are lucky. You can easily do this.
    1 point
  35. I may be wrong here, but my understanding is that there used to be but not really anymore. Some purists/traditionalists I guess still use a certain frequency for what you are asking though. Those channels are 19 and 20 (462.650 and 462.675 respectively) and apparently typically use 141.3 for the tone. The tribal elders here will eventually reply to correct me and/or point you in the right direction.
    1 point
  36. 5:35:29 PM – 5:43:51 PM Late to this thread, I purchased from Amazon on July 16th, not sure when mine was manufactured. The mike keys are definitely backlit. Even with running the new programming software was unable to alpha tag the channels until after updating the firmware. Still cannot edit/create alpha tags from the radio itself, it does not move from the first position. Otherwise all functions seem to work well. RX is clear and getting reports of full quieting/solid audio via one of Seattle area's repeaters about 34 miles away on mid (20W). Haven't attempted 5 Watts yet, my similarly powered HT can open that repeater but audio isn't great using the same J-Pole antenna up above my deck. Could be too that the HT is just not a fantastic radio.
    1 point
  37. GrumpyGrunt

    Welcome!

    Thanks for the welcome... WSDR581 is in the house! LOL!
    1 point
  38. What the actual f are you talking about? He's not talking about linking. The guy just wants to talk to people in the area. Learn some reading skills, get help, see a specialist, either back away or increase your meds. You have missed the plot here. Way to help a guy out man, nice job.
    1 point
  39. WRKC935

    Node Questions

    Yeah, I suppose a factual explanation is in order. SO a NODE is actually a small computer (typically a Raspberry Pi) that is using an IP (Internet Protocol) based PBX (Private Branch Exchange) or telephone system (think similar to a business phone system connected on a network). The software uses the Internet to create 'conference bridges' more or less to link the computers together so they can carry transmit and receive audio and PTT telemetry to the other nodes that are connected. A vast part of the nodes are a single PBX (stand alone phone system) with a single extension (the repeater connected to it) to join the conference bridges. Now you can technically support multiple extensions on a PBX. These can be other repeaters, or they can be SIP soft phones like Zoiper (what I use) or an actual IP telephone and those can be bridges as well. If you are using a SIP interface, of course there is no PTT button on either the soft phone or an IP desk set so you have to use dial buttons for the keying. Anyone with Google can find out this will work. I am not going to go into how it works, nor will I go into how to do it (the soft phone / IP phone thing. I will say that it's not supported on the mygmrs.com system and messing with someone's nodes is also a big no no so don't be trying to experiment on this system. Although simplex nodes are possible, I don't know that is supported on here either. But I am NOT the person to ask about that. There are others here that can comment if they choose to. The previous answer was in response to the fact that there are a number of folks that don't like linking. And there is much debate on if it's really even legal according to the FCC regulations. To the point I had a connected repeater on the system and took it down because of the continued questions about the legality of it. So, if you want to play in that arena, do so with your eyes wide open and understanding that questions exist about doing it. I didn't want to get too deep in the weeds on how this all works. I think this should be a reasonable explanation to give you an understanding of the underlying technology in play.
    1 point
  40. @wqnd300 and @WRXP381 You both are being obnoxious jerks. @Lscott has just as much right to be here and talking about what digital might bring to GMRS as either of you. He brings much more intelligent discussions and less judgmental rhetoric than you also. If you don’t agree with him, that’s no problem. He and I have disagreed about digital modes also, but it’s easy enough to disagree without becoming disagreeable.
    1 point
  41. Objection your honor, hearsay. No one but that system's owner actually knows what happened. All we actually know is what he's told the club's president. I'm still not convinced that the 'official' story there is what's actually happened, especially given that no other linked GMRS repeater system seems to have received anything similar.
    1 point
  42. I agree that they are not very useful. We did find one benefit when setting different calls for different radios. My kids sound a lot alike so, on one radio there is a wolf (he calls it an elephant) and the other one is a turkey (very fitting). To be fair, they chose mine to be an "old crow" and mom's is a "cougar".
    1 point
  43. The only time I've ever legitimately used a call button was when I was trying to get my kids' attention via their handhelds. They were at home, watching TV, and were ignoring the radio sitting right next to them. So I hit the call button on my MXT575, called for them again, and got a response. Every other time that button has been pressed has been by accident.
    1 point
  44. When I first got the Midland LXT600 FRS/GMRS HT's for use up at the lake where there's zero cell service, My wife seemed to think she HAD to push the Call button before she could talk to me out on the boat from the cabin. I quickly explained to her she could just push the PTT and start talking... I imagine it might be useful in very high noise environments where you may not hear people calling you, and the piercing tone would alert you? Mostly when scanning the channels, if I hear these, it's kids playing radio. "It is about as useful as the 'Alarm' button on many radios." Or a Roger Beep! Sorry, couldn't resist!
    1 point
  45. Update (Last): I got the 1000G Plus configured as a repeater and once again did the above traveling to test it out. The results were the same EXCEPT I went a little farther. Last time I got to 15.71 miles this time I went 17.1 miles. Which is about 1.4 miles farther and she was still hearing my “Loud and Clear.” This tells me I could go even farther. BUT since 17.1 miles is on the other side of town that we go to it is good enough for me. This experiment tells me that a repeater does work for the purpose I wanted and that was to allow my wife to use her Btech hand held and still communicate with me in town. I know some of you will say “So will a base station” but the limitations of a base station for us is that my wife doesn’t want to be “tied” to the microphone of a base station. Here is the equipment we used: 2 Wouxum 1000G Plus configured as a repeater, XLT Duplexer (DP-450X5N-50 from), 50 feet of M&P Cable, Smalex SEC-1235M power supply and the TRAM 1486 Antenna. For my Tahoe, a Wouxum 1000G Plus and the Midland MXTA26 6db gain Whip Antenna. For my wife at home she had the Btech GMRS PRO, Btech BS-22 (to activate the PTT on the GMRS PRO), and Airpods for a speaker. I know people suggested the COMET CA-712efc but I already had the Tram and if it didn’t work I’d get the COMET but as you can see the Tram works fine. This is the end of my updates. I’d like to thank everyone who replied to this post and gave me good advice and comments.
    1 point
  46. I left my goat rope at your mom's house..
    1 point
  47. It seems someone always wants to change GMRS. Other ideas I don’t think would work… painting two lanes for cars but trucks get there own overlapping lane to drive down the middle… yeah but it’s more lanes and cars can fit there, doesn’t it sound great??
    1 point
  48. gortex2

    GMRS 10-Codes

    Again we are beating a dead horse. If you want to use some 10 code use it. I can say in Public Safety world very little of the 10 code system is still in play. Other than 10-4 you wont hear it much in public safety. In SAR we have a few "CODES" for critical information but to be honest just go to encryption if we need to discuss that.
    1 point
This leaderboard is set to New York/GMT-04:00
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.