daschnoz Posted August 2, 2021 Report Posted August 2, 2021 I don't mind RBs on a repeater, GMRS or HAM, generated by the repeater. It is a consistant tone, and definative marker to know that the other station has completed his transmission. A simple beep in the squelch tail is all that is needed. On simplex however, if everyone is using a different radio, generating a different tone, then it becomes a RB chorus. That drives me crazy. I do wish that the Retevis RT97 had a RB. I use it when we go camping, and I think a RB would keep my kids from stepping all over eachother. I ended up turning on the squelch tail (about 1 sec) and told them to wait for the crash before keying up. It seems like that was good enough. Quote
WRPP915 Posted May 7, 2022 Report Posted May 7, 2022 I don't use a roger beep but I don't care if you do. I have heard many tell others to turn theirs off for what ever reason. It usually comes from someone with a Motorola radio with their obnoxious tone they generate when the mic is un-keyed,kind of likea roger beep, at least it server the same purpose. I guess they like everyone to know they are using a Motorola radio I suspect. Quote
WRPC505 Posted May 14, 2022 Report Posted May 14, 2022 I personally don't use roger beeps; never have and never will. But a larger problem (for me anyway) is when someone uses foul language while on the air. I overheard a close relative use such language on his son's FRS radio; I had to bark at him that what he was saying wasn't tolerated, especially if I'm within range or physical earshot. He gave me a bit of a pissed-off look at first, but he stopped it. I have both Amateur Radio and GMRS licenses; I'm not taking any chances on losing either or both because of someone's lack of education on how proper radio etiquette works. Warren Rowe, WQ1C / WRPC505 Jekking00 1 Quote
MichaelLAX Posted May 14, 2022 Report Posted May 14, 2022 1 hour ago, WRPC505 said: I overheard a close relative use such language on his son's FRS radio; I had to bark at him that what he was saying wasn't tolerated, especially if I'm within range or physical earshot. He gave me a bit of a pissed-off look at first, but he stopped it. I have both Amateur Radio and GMRS licenses; I'm not taking any chances on losing either or both because of someone's lack of education on how proper radio etiquette works. This is a new topic for me: could you please explain to me how someone else using foul language on his son's FRS radio puts your FCC licenses at risk?!? AdmiralCochrane, DeoVindice and Raybestos 3 Quote
WRPC505 Posted May 14, 2022 Report Posted May 14, 2022 (1) I heard him use that language, and (2) if I didn't stop it (especially if he's using my gear) then the FCC will come breathing down my neck if someone that knows me complains to them. It's happened to others before, trust me. Quote
OffRoaderX Posted May 14, 2022 Report Posted May 14, 2022 28 minutes ago, WRPC505 said: FCC will come breathing down my neck if someone that knows me complains to them. It's happened to others before, trust me. Not that I dont trust you, or think you're making stuff up out of thin air, but i would love for you to share some actual facts about all these others this has happened to. Perhaps a link to the FCC enforcement database entry? Because as I'm sure you know, every time the FCC breathes down anyones neck, for any reason, by law, the FCC must publish that enforcement. WRQS425, WRUK284, WSBT754 and 7 others 7 1 2 Quote
Citizen Posted May 15, 2022 Report Posted May 15, 2022 (edited) I retired from a large company that had numerous buildings, some blocks apart from each other. To their credit, they ran a shuttle bus service, sort of like an airport rental car shuttle bus. They were equipped with business band UHF radios. The base and every bus had the roger beep on. Just wait ‘till you find yourself held captive on one of the buses, and all the drivers and base carry on a convo of short, 1-5 word sentences back and forth at near full-volume for about 10-15 minutes! Yeah, that’s right, you’ll get tired of the roger-beep REAL quick. It’s already been said that the radio(s) belong to the owner, and not me, so I know I didn’t have a say in the matter. So I never complained. And I suppose I didn’t have to listen to the conversation either (I could have just gotten off the bus and walked, right?). But it sure would have been nice if the programmer would have shut off the default roger beep on all the radios before mounting in the buses. And it would have been a heck-of-a-nice courtesy if the driver had turned down the radio a few hundred-thousand decibels, as I'm sure I suffered hearing loss. But who am I to say…. ... Edited May 15, 2022 by Citizen spelling correction Quote
Radioguy7268 Posted May 15, 2022 Report Posted May 15, 2022 A good "courtesy tone" is generated by the repeater, and should be at least 10-12 dB down in volume from the voice audio. In other words, the courtesy tone is well below the user's voice level. It should not be shrill or harsh. It's more of a clue than a control signal... A radio that generates its own Roger Beep upon release of the PTT should be avoided IMHO. I haven't played around with enough CCR's to know what's available in the programming, but the tones I have heard over the air on GMRS usually seem to be on the edge of obnoxious. Quote
WRPC505 Posted May 16, 2022 Report Posted May 16, 2022 On 5/14/2022 at 5:18 PM, OffRoaderX said: Not that I dont trust you, or think you're making stuff up out of thin air, but i would love for you to share some actual facts about all these others this has happened to. Perhaps a link to the FCC enforcement database entry? Because as I'm sure you know, every time the FCC breathes down anyones neck, for any reason, by law, the FCC must publish that enforcement. Sounds to me like you DON'T trust what I'm saying...whatever. I don't need to quote book, chapter and verse on this stuff to anyone, although I will say that a lot of this happened many moons ago. If you really want to know for sure, look for yourself. I'm going to move on and spend my time on better things than arguing about this stuff with you. Have a nice week. Quote
OffRoaderX Posted May 16, 2022 Report Posted May 16, 2022 I have looked myself (at the last 10 years of enforcement), thats why I dont trust what you're saying. WRPR990, WRUK284, TNRonin and 8 others 10 1 Quote
back4more70 Posted May 19, 2022 Report Posted May 19, 2022 I leave my roger beeps turned on. It doesn't trouble me, and I find it helpful when other unfamiliar folks are on the same channels since I can easily tell they are not addressing my group as their tones sound different than ours. It's the same argument as a commercial on a radio station; if you don't like it, change the channel. Quote
jwilkers Posted May 25, 2022 Report Posted May 25, 2022 I leave my roger beeps turned on. It doesn't trouble me, and I find it helpful when other unfamiliar folks are on the same channels since I can easily tell they are not addressing my group as their tones sound different than ours. It's the same argument as a commercial on a radio station; if you don't like it, change the channel.Just be careful.....Roger beeps are "good buddy beeps" to truck drivers. You may find yourself the recipient of an invite to a rest area men's room for a romantic interlude Sent from my SM-A125U using Tapatalk WRPQ991, Raybestos, SteveC7010 and 1 other 3 1 Quote
DONE Posted May 26, 2022 Report Posted May 26, 2022 Gonna get me a roger beep, and door bell for key up and an echo board so I can sound like one of them big rig radio operators... maybe even get me one of them linears. WRPR990, WRQI583 and WRPQ991 3 Quote
WRQI583 Posted June 26, 2022 Report Posted June 26, 2022 If you are operating through a repeater you do not need a roger beep. Most repeaters have a courtesy tone if activated to let you know when you can transmit. If you are running simplex they are good to have especially if you are going to have a significant distance between radios to where your all on the fringe of radio range. The only time I have encountered possibly needing a roger beep on a repeater is when the repeater doesn't have a courtesy tone and your radio settings are set just so that your radio's receiver only opens up when the other guy is talking and stays closed otherwise. I usually keep my radios set like that so that I don't hear all the squelch tail crunching and other beeps that come out of a repeater. Quote
WRPR990 Posted June 27, 2022 Report Posted June 27, 2022 I have my roger beeps on, even on my UV5R's. When I'm talking on the local ham repeaters, I keep the roger beep on. No one has ever said anything to me about it. There's only one GMRS repeater in my area, and when I talk on it, I keep the beep on, no one has ever complained about it. It really doesn't matter to me if it's on or off. Now, if I could find a micro echo board to put in one of my GMRS radios, I'd be a happy camper. blastco2 1 Quote
DONE Posted August 17, 2022 Report Posted August 17, 2022 Two pages to discuss roger beep settings???? It's simple, turn that crap off. End of story. neosmith20 1 Quote
OffRoaderX Posted August 17, 2022 Report Posted August 17, 2022 4 hours ago, WRKC935 said: It's simple, turn that crap off. End of story. My radio, my choice. scottfen, WRPR990, neosmith20 and 4 others 4 1 2 Quote
Blaise Posted August 17, 2022 Report Posted August 17, 2022 There once was a man named Roger Beep He got accosted by a radio creep Told him to leave, like a good little sheep 'Cause his presence made the weenies weep! Quote
WSAA635 Posted January 27 Report Posted January 27 On 6/8/2021 at 3:58 PM, gortex2 said: To me there is no need for it. None of my radios have it. I also see no reason for it. I can think of one good reason for it. It let's the other person know when you're finished talking without having to say "Over" or "Roger" or "Copy". Quote
Hoppyjr Posted January 27 Report Posted January 27 I can think of one good reason for it. It let's the other person know when you're finished talking without having to say "Over" or "Roger" or "Copy".Most folks know when you’re done speaking when they stop hearing words. Radioguy7268, gortex2, WRCQ487 and 1 other 1 3 Quote
WRWE456 Posted January 27 Report Posted January 27 And some of us like saying 'Over" "Rodger" and "Copy". Makes us sound "Hip'! Or at least old. WRXB215 1 Quote
SteveShannon Posted January 27 Report Posted January 27 Most modern radios have a green or blue light that illuminates while a transmission is being received and turns red when you hit the PTT. But I don’t mind a Roger beep. I can completely ignore it. WRHS218, WSAN547 and WRWI368 3 Quote
WRXB215 Posted January 29 Report Posted January 29 I have no real preference concerning the roger beep but "some people" really get their panties in a wad over it. One morning on my way out of town at about 4:30am I was using a new UV-5R and the roger beep was on. Some guy came on and chewed me out for about 15 minutes. Some people really need to get a life. WRWI368, SteveShannon, WRDV967 and 1 other 3 1 Quote
Blaise Posted January 29 Report Posted January 29 6 hours ago, WRXB215 said: Some guy came on and chewed me out for about 15 minutes. Please tell me you continued that conversation for as many hours as possible, consistently using the beep! SteveShannon, WSAA635, WRWI368 and 1 other 1 3 Quote
WRXB215 Posted January 29 Report Posted January 29 2 minutes ago, Blaise said: Please tell me you continued that conversation for as many hours as possible, consistently using the beep! Oh, I kept answering him over and over and apologizing profusely while reminding him is was going to be a while before I was going to pull over and change it. You know, it's just to dangerous to change it while driving. SteveShannon, WRYZ926 and WRUU653 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.