Jump to content

GMRS Road/Travel Channel Poll  

90 members have voted

  1. 1. Which channel should be the unofficial (or official) road/travel channel for GMRS?

    • Channel 20 with CTCSS tone 141.3
      13
    • Channel 20 simplex
      15
    • Channel 19
      60
    • Pie. (3.14.....)
      2


Recommended Posts

Posted

I'm voting for 19 instead of 20 because (this is really not going to influence the nation, but on the off chance I'm wrong) road traffic on 20 simplex, will be competing with repeaters on 20, especially with the travel tone enabled. In heavily populated areas with many repeaters and overlapping coverage on all pairs, it will get ugly. 

 

As it stands now, we're so congested here, that on some pairs, if you are running the travel tone you are bringing up 3 repeaters and being heard for 180-200 miles in every direction. I can't imagine the harmful interference that could potentially be added around here by using 20 simplex with the 4a tone.

Posted
2 minutes ago, marcspaz said:

I'm voting for 19 instead of 20 because (this is really not going to influence the nation, but on the off chance I'm wrong) road traffic on 20 simplex, will be competing with repeaters on 20, especially with the travel tone enabled. In heavily populated areas with many repeaters and overlapping coverage on all pairs, it will get ugly. 

 

As it stands now, we're so congested here, that on some pairs, if you are running the travel tone you are bringing up 3 repeaters and being heard for 180-200 miles in every direction. I can't imagine the harmful interference that could potentially be added around here by using 20 simplex with the 4a tone.

Good points, and consistent with the historical tech-based reasons you educated us about on the establishment of CB channel 19.  And most of all, yet another good reason for GMRS 19 to be selected.

I'd like your post but I'm all out of likes for the day.

Posted
9 minutes ago, liahju said:

Personally I prefer 20. I have a repeater on (19) #27 and it happens that another repeater on the same channel more than 25 miles away often overlap each other when they coincide in their duty cycle.

Thanks for voting!

Posted
3 hours ago, marcspaz said:

I can't imagine the harmful interference that could potentially be added around here by using 20 simplex with the 4a tone.

I'd hazard to guess, it'll be close to zero. Only these in a simplex range will be affected.

Posted
16 hours ago, Tyeandjeff1979 said:

As a commercial fisherman I have been monitoring 16 on marine vhf for 30years and like the idea of a gmrs channel to monitor for "hailing and distress " so 19 it is for me. WRFU 414 standing by on GMRS 19 in Alaska.  Although I'll still be scanning to.

Marine channel 16 (156.80 mHz) is the USCG International Distress calling frequency, recognized by most civilized countries.  Although not required (I believe), the CG asks all boats/ships to monitor Ch 16, so good job there, Tye and Jeff.

Although not a mariner, I monitor marine ch. 16 on my scanner at home, as I’m close enough to the coast that I occasionally hear the CG broadcast calls for assistance when vessels are in peril around Galveston, or persons are reported missing or in the water.  Heard one just 2 days ago (capsized kayak in Galveston bay, person unaccounted for).

Additional useless notes:  Marine ch. 13 (156.65) is for ship bridge-to-bridge and ch. 9 (156.45) is the general boater calling frequency.  I also scan these, but have yet to hear anything.

Posted
10 hours ago, Citizen said:

 

Additional useless notes:  Marine ch. 13 (156.65) is for ship bridge-to-bridge and ch. 9 (156.45) is the general boater calling frequency.  I also scan these, but have yet to hear anything.

In alaska, fisherman and boaters hail and monitor on 16 and just keep it short. 13 and 9 are used mostly by harbor masters and are usually pretty quiet.  

  • 3 weeks later...
Posted

With only 22 channels available for me I just scan them all. I even do that at home. If I hear something interesting I stop the scan.

It helps if the radio scans reasonably fast too. Some of the Chinese radios are really SLOW while scanning, if that matters to you.  That might be one thing to check before laying out your money.

Posted
1 hour ago, Lscott said:

With only 22 channels available for me I just scan them all. I even do that at home. If I hear something interesting I stop the scan.

 

Same here.  And the reality is if I really want to talk to someone and don't hear anyone, with only 8 high power channels, I can call for a contact on every channel in 2 minutes, and that's allowing 10 seconds or more per channel for someone to reply to me before I spin the dial.

 

Like I said, I'm not against the users agreeing to standardize among themselves... but I'm not holding my breath. Especially since ORI died off, and the was the closest to "coordination" I have seen on this service. 

  • 1 year later...
Posted

16, already using it for off road and I can't be bothered to change the channel 😂 

but seriously even though I'm no where near line "A" I would not choose to exclude them so if I had to choose I'd say 20 but does anyone really use a road channel for GMRS?  Add me to the scanning category. 

Posted
27 minutes ago, WRUU653 said:

16, already using it for off road and I can't be bothered to change the channel 😂 

but seriously even though I'm no where near line "A" I would not choose to exclude them so if I had to choose I'd say 20 but does anyone really use a road channel for GMRS?  Add me to the scanning category. 

I don’t. 
I will sometimes listen to ham radio though. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.